Loading ...
Loading ...
Loading ...
18
Electrical Wiring Installation
Plug downdraft’s power cord into outlet.
Note: Make sure that power cord is routed away from the heat gen-
erated by the cooktop.
Plug electrical panel cover into lower receptacle as shown.
Connect blower wires to wires in wiring box. Replace wiring box cover.
Mount a standard wiring box, with 3-pronged receptacle, within
reach of downdraft’s power cord. Run appropriate power cable and
connect it to receptacle.
CAUTION
All electrical wiring should be done by a qualified
person(s) in accordance with all applicable codes
and standards.
• If using a remote blower (purchase separately), the
system draws 6.0 Amps (max.) and requires a 120 VAC,
60 Hz circuit.
• The unit has a 30 in. long power cord with a 3-pronged plug
attached to the electrical panel. Plan to provide a grounded
outlet in a location which will allow the unit’s power cord to
reach.
• Install electrical box according to local codes.
Exterior or In-Line Blower only
18b
22b
20a21b
Remove wiring box cover and route blower wire into wiring box.
From Exterior or
In-Line Blower
From Exterior or
In-Line Blower
19b
I
White (Common)
Gray (Med.) Blue (Med.)
Black (High)
Greed (Ground)
Lift
Downdraft
Remote
Blower
White (Common)
Blue (Low)
Red (Low)
Green (Ground)
Orange (High)
Black (High)
20b
Loading ...
Loading ...
Loading ...