Loading ...
Loading ...
Loading ...
4
A. Connect the two black
thermostat wires to the two
loose heater wires.
B. Connect the two hot
supply wires to the two red
thermostat wires.
Wrap supply (white) wire
with black tape to identify it
as hot!
Tuck all the wires back into
the individual wiring com-
partments, and make sure
the connections are tight.
Attach with small screw at
bottom.
DOUBLE POLE (4-WIRE) BTF2 - 240/208 or 208 VOLT
120 Volt LEFT SIDE
120 Volt RIGHT SIDE
A. Connect the red thermostat
wire labeled L2 to the black
thermostat wire labeled OFF.
B. Connect the neutral (white)
supply wire to the white heater
wire.
C. Connect the hot supply wire
to the remaining red thermostat
wire.
D. Connect the remaining black
thermostat wire to the remain-
ing heater wire.
Tuck all the wires back into the
individual wiring compartments,
and make sure the connections
are tight. Attach with small
screw at bottom.
120 Volt RIGHT SIDE
240/208 Volt RIGHT SIDE
A. Connect the hot supply
wire to the red thermostat
wire.
B. Connect the black thermo-
stat wire to the black heater
wire.
C. Connect the neutral (white)
supply wire to the white heater
wire.
Tuck all the wires back into
the individual wiring compart-
ments, and make sure the
connections are tight. Attach
with small screw at bottom.
240/208 Volt LEFT SIDE
120 Volt LEFT SIDE
SINGLE POLE (2-WIRE) BTF1 - 120 VOLT
DOUBLE POLE (4-WIRE) BTF2 - 120 VOLT
Proceed to OPERATING INSTRUCTIONS.
Proceed to OPERATING INSTRUCTIONS.
Proceed to OPERATING INSTRUCTIONS.
A
B
C
A
A
B
B
A
B
C
D
A
B
A
B
A
B
C
D
A
B
C
DO NOT
CUT!
DO NOT
CUT!
DO NOT
CUT!
INSTALLATION INSTRUCTIONS
Loading ...
Loading ...