Loading ...
Loading ...
Loading ...
20
CARE & CLEANING
Caution for aluminum use on the cooktop
• Aluminum Foil - Use of aluminum foil on a hot
cooktop can damage the cooktop. Do not use thin
aluminum cooking utensils or allow aluminum foil to
touch the surface elements under ANY circumstances.
• Aluminum utensils - The melting point of aluminum
is much lower than that of other metals. Care must be
taken when aluminum pots or pans are used on the
cooktop. If aluminum pans are allowed to boil dry when
using the cooktop, the utensil may be damaged or
destroyed.
Replacing the oven light
To replace the interior oven light bulb
1. Turn electrical power off at the main source or unplug
the range.
2. Open oven door for access to interior oven light. Once
located, press wire holder to one side to release the
glass shield (See Fig.1).
3. Replace bulb with a new 40 watt appliance bulb.
4. Replace glass shield over bulb and snap wire holder
into place.
5. Turn power back on again at the main source (or plug
the range back in).
6. The clock will then need to be set with the correct
time of day. To reset, see “Setting the Clock” in this
Use & Care Guide.
Be sure the range is unplugged and all parts are COOL
before replacing oven light. Wear a leather-faced glove
for protection against possible broken glass.
CAUTION
wire
holder
glass
shield
IMPORTANT
The glass shield and wire holder must be in place
whenever the oven is in use. This shield helps protect
the appliance bulb from high temperatures.
The interior oven light bulb is located on the rear wall of
the oven and is covered with a glass shield held by a wire
holder.
Fig.1
Loading ...
Loading ...
Loading ...