Loading ...
Loading ...
Loading ...
Unpack the heater carefully and retain the packaging for possible future use, in the event of
moving or returning the re to your supplier.
These models are designed to be free standing and are normally positioned against a wall.
The re incorporates a ame eect, which can be used with or without heating, so that the
comforting eect may be enjoyed at any time of the year. Using the ame eect on its own only
requires little electricity.
A choice of 1kW or 2kW heat output is provided by the fan heater, which is located at the bottom
of the unit.
Before connecting the heater check that the supply voltage is the same as that stated on the
heater.
Please note: Used in an environment where background noise is very low, it may be possible to
hear a sound which is related to the operation of the ame eect. This is normal and should not
be a cause for concern.
Technical Information
Model No: LEC20, FLN20
with mechanic thermostat room temperature control.
Thank you for choosing a Dimplex electric re.
General Information
Heat Output 230V 240V
Nominal Heat Output
P
Nom
1.7 1.9 kW
Minimum Heat Output
P
min
0.9 0.9 kW
Maximum Continuous Heat Output
P
max,c
1.7 1.9 kW
Auxiliary Electricity Consumption 0 0
kW
In Standby Mode
el
SB
0.38 0.41 W
Dimplex Optiame Stove Fire
Models: Leckford LEC20, Fullerton FLN20
Electrical connection
WARNING – THIS APPLIANCE MUST BE EARTHED.
This heater must be used on an AC ~ supply only and the voltage marked on the heater must
correspond to the supply voltage. Before switching on, please read the safety warnings and
operating instructions.
Operating The Product
Controls - see Fig. 2
These main ON/OFF switch must rst be turned ON to operate any of the other controls.
Setting Operation Indication
Flame Eect Press the ‘I’ button once Bottom Neon
Flame Eect & 1kW heat Press the ‘I’ button again Bottom & middle neon
Flame Eect & 2kW heat Press the ‘I’ button again All 3 neons
To turn o any of the settings Press the ‘ ’ button once.
Loading ...
Loading ...
Loading ...