Loading ...
Loading ...
Loading ...
7
4. To c onnect the collection bag to the machine, rst fasten
the collection bag strap to the strap hook on the tube
assembly, and then attach the bag adaptor to the air outlet
(Fig. 5).
5. Clip the shoulder support strap to the top of the blower, as
shown (Fig. 6).
Operation
Starting + Stopping
mWARNING! Before switching on the tool, ensure that it
is not in contact with any object.
1. Secure the extension cord to the motor housing using the
cord retainer located at the rear of the blower. Then plug
the appliance cord into the extension cord (Fig. 7).
2. To start the unit, press the ON (I) side of the ON/OFF
switch (Fig. 8).
3. To stop the tool, press the OFF (O) side of the ON/OFF
switch (Fig. 8).
mWARNING! After switching o the tool the motor
continues to run for a few seconds.
Speed Control
This unit is equipped with six variable speed settings (1 to 6)
(Fig. 9).
• Turn the speed selector switch to position “1” or “2” for
LOW speeds.
• Turn the speed selector switch to position “3” or “4” for
MEDIUM speeds.
• Turn the speed selector switch to position “5” or “6” for
HIGH speeds.
Fig. 4
Screw
Screw
Fig. 5
Collection
bag
Collection
bag strap
Strap hook
Fig. 6
Clip
Hole
Fig. 7
Appliance
cord
Extension
cord
Cord
retainer
Fig. 8
ON/OFF switch
ON (I) OFF (O)
Fig. 9
Speed selector
switch
6 5 4 3 2 1
Loading ...
Loading ...
Loading ...