Loading ...
Loading ...
Loading ...
10
Care + Maintenance
mWARNING! Disconnect the extension cord before
performing any maintenance task.
If the extension cord is plugged into the appliance, someone
could accidentally turn on the unit while you are performing
maintenance on it, which could result in serious personal injury.
Cleaning the Unit
1. Use a small brush to clean the outside of the unit. Do not
use strong detergents, household cleaners that contain
aromatic oils (e.g. pine and lemon) or harsh solvents such
as kerosene as these substances can damage the plastic
housing or the handles. Wipe o any moisture with a soft,
dry cloth.
2. Empty the bag after each use to avoid deterioration and
obstructing air ow, which will reduce the performance of
the unit.
3. Wear eye protection and a dust mask. Clean the bag as
needed. Turn the bag inside out after initial emptying and
vigorously shake out dust and debris.
4. After removing the collection bag, ensure that any
possible dirt residues are removed from the air outlet area.
5. Wash the bag once a year, or more often if needed. Follow
the steps below:
i. Remove the bag.
ii. Turn the bag inside out.
iii. Hang it up.
iv. Hose it down thoroughly.
v. Leave it hanging to dry.
vi. Turn the bag right-side out and reinstall.
Clearing a Blocked Tube/Impeller
mWARNING! To avoid serious personal injury, be sure the
unit is OFF and unplugged before clearing the impeller.
mWARNING! To avoid serious personal injury, always
wear gloves to protect yourself from the impeller blades or
other sharp objects.
During the vacuuming process, certain objects such as
cloth, rope or large diameter sticks may obstruct the fan and
block the motor. You will notice a power drop or intermittent
operation when using the unit.
In the event an obstruction occurs and power is curtailed:
1. Slide the ON/OFF switch down to the OFF (O) position
until the unit comes to a complete stop.
2. Unplug the unit.
3. Remove the tubes and the bag.
4. Using protective gloves, carefully remove the material
blocking the tube or impeller. Inspect the blades to ensure
no damage has occurred. Rotate the impeller blades by
hand to ensure the blockage is completely cleared.
5. Reinstall the blower tube or vacuum/mulcher tubes and
the bag.
6. Wait 3 minutes for the motor to cool.
7. Plug the unit back into the power supply and turn the ON/
OFF switch to ON (I). The blower vac will resume normal
operation.
Storage
1. Examine the electric blower/vacuum/mulcher thoroughly
for worn, loose or damaged parts. Should you need to
repair or replace a part, contact an authorized
Snow Joe
®
+ Sun Joe
®
dealer or call the Snow Joe
®
+
Sun Joe
®
customer service center at 1-866-SNOWJOE
(1-866-766-9563) for assistance.
2. Examine the extension cord thoroughly for signs of excess
wear or damage. If it is worn or damaged, replace it
immediately.
3. Disconnect the extension cord from the electric blower/
vacuum/mulcher before storing.
4. Store the cord with the electric blower/vacuum/mulcher
indoors in a clean, dry and locked location out of the
reach of children and animals.
NOTE: Devices for retaining extension cords are commercially
available should you wish to purchase one.
Service and Support
If your Sun Joe
®
SBJ604E-RM 3-in-1 electric blower/vacuum/
mulcher requires service or maintenance, please call the
Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
Model and Serial Numbers
When contacting the company, reordering parts or arranging
service from an authorized dealer, you will need to provide the
model and serial numbers, which can be found on the decal
located on the housing of the unit. Copy these numbers into
the space provided below.
Record the following numbers from the housing or handle of your
new product:
S B J 6 0 4 E - R M
Model #:
Serial #:
Loading ...
Loading ...
Loading ...