Loading ...
Loading ...
Loading ...
9
Actual model may vary from images shown.
CYCLONE SEPARATOR
How to Clean
Remove dirt cup as described in Fig. 3.1.
3.3 Unlock cyclone cup from side of dirt cup.
3.4 Unscrew inner shroud from cyclone cup.
3.5 Gently tap inner shroud against something firm to release dirt.
Replace the inner shroud back inside the cyclone cup, and lock cyclone cup
back onto dirt cup.
Replace dirt cup.
To reduce the risk of personal injury - Unplug
vacuum before cleaning or servicing.
Do not use vacuum without dirt cup or filters
in place.
3.3
3.4
3.5
FILTERS
To reduce the risk of personal injury - Unplug
vacuum before servicing.
Do not use vacuum without dirt cup or filters
in place. Allow filter to dry completely before
replacing.
IMPORTANT
Rinsable can be rinsed in warm water (max
40°C). Allow to air dry for 24 hours before
replacing. Do NOT use any detergents or
boiling water to wash filter.
When used and maintained properly, your
Rinsable Filter should not need replacement
within the warranty period. If desired, an additional
filter is available at Hoover.com or call 1-800-944-
9200. Ask for Hoover
®
Part No. 440004636.
What to Buy: Rinsable Filter
When to Clean
It is recommended that the Rinsable filter be
checked and cleaned at least every 2 months or
more frequently with heavy use.
How to Clean
Remove dirt cup as described in Fig. 3.1.
3.6 Twist dirt cup lid counterclockwise and remove
Rinsable filter.
3.7 Grasp tab on filter and remove from filter
cartridge.
3.8 Gently tap the filter and filter cartridge on the
inside of a trash receptacle to remove dust and dirt.
3.9 Hold Rinsable filter under running water to
clean.
Allow to air dry for 24 hours before replacing.
Replace filter in dirt cup and twist lid clockwise until
secure.
Replace dirt cup.
Rinsable Filter
3.6
3.7
3.8
3.9
IMPORTANT
The cyclone separator should not be submerged in water.
WARNING
!
!
WARNING
!
!
Loading ...
Loading ...
Loading ...