Loading ...
Loading ...
Loading ...
9
2. Check that the mains voltage is the same as that marked
on the rating plate of the battery charger. Then, plug the
charger adapter into an appropriate AC power outlet.
Connect the charger plug into the charge socket of the
battery to start charging (Fig. 2).
3. The battery will take approximately 5 hours to charge.
The battery indicator LEDs will twinkle and illuminate one
by one during the charging process. Unplug the charger
immediately when the 3 LEDs are all illuminated.
mCAUTION! FIRE HAZARD. When disconnecting the
charger from the battery, be sure to unplug the charger from
the outlet rst, then disconnect the charger from the battery
mWARNING! This charger does not automatically
turn o when the battery is fully charged. Please take care
not to leave the battery plugged into the charger. Switch
o or unplug the charger at the mains when charging is
complete.
4. Timely recharging of the battery will help prolong the
battery's life. You must recharge the battery pack when
you notice a drop in the equipment's power.
IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the
battery.
Assembly
mWARNING! Do not use this product if it is not
completely assembled or if any parts appear to be missing or
damaged. Use of a product that is not properly and completely
assembled or with damaged or missing parts could result in
serious personal injury.
The misting fan comes fully assembled. For rst use, take out
the misting fan assembly from the bucket (Fig. 3).
Operation
IMPORTANT! This product is intended to be used for:
• Outdoor cooling with water in the water bucket (included).
• Connected to a garden hose (not included) using the
included quick-connector.
• Indoor cooling without water (Fan only).
mWARNING! Do not allow familiarity with products to
make you careless. Remember that a careless fraction of a
second is sucient to inict serious injury.
mWARNING! Keep water and mist discharge pointed
away from all electrical devices to reduce the risk of
electrocution or electric shock.
Fig. 1
Battery pack
Fig. 2
Battery
indicators
R
Bucket
Misting fan
assembly
Fig. 3
Loading ...
Loading ...
Loading ...