Loading ...
Loading ...
Loading ...
11
2. Flip the battery compartment cover up, insert the battery
in until it clicks into place (Fig. 8). Close the battery
compartment cover.
3. Press the power supply button, the fan will beep and the
power supply button will illuminate.
4. Press the fan switch to start the fan. Change the fan
speed by pressing the fan switch again until it reaches the
desired speed.
Use the Fan with Misting
USE WITH THE WATER BUCKET (INCLUDED)
mWARNING! Children can fall into the bucket and drown.
Keep children away from the bucket with even a small amount
of liquid.
The misting fan is designed to operate atop the included
6-gallon water bucket. Clean the bucket with soap and water
before each use.
1. Place the bucket lled with water on a at, level surface.
NOTE: Add ONLY clean, cold water into the bucket. Do
not overll.
2. Set the fan’s base securely onto the rim of the bucket. The
end of the intake hose should go straight down into the
bucket (Fig. 9).
NOTE: The fan assembly cannot be attached to the
bucket. Be aware that they cannot be moved as a single
unit.
3. Flip the battery compartment cover up, insert the battery
in until it clicks into place (Fig. 8). Close the battery
compartment cover. Press the power supply button, the
fan will beep and the power supply button will illuminate.
4. Press the fan switch to start the fan. Change the fan
speed by pressing the fan switch again until it reaches the
desired speed.
5. Press the pump switch to start misting. Change the
misting ow by pressing the pump switch again until it
reaches the desired ow.
mWARNING! When lling, moving, or emptying bucket,
be careful not to spill water and do not overll bucket. Spilled
water can result in a slippery surface, create a slip and fall
hazard, and cause property damage.
Fig. 7
Intake hose
Fan
assembly
base
Fig. 8
Battery pack
Battery
compartment
cover
Fig. 9
Intake hose
Fan
assembly
Water
bucket
Loading ...
Loading ...
Loading ...