Loading ...
Loading ...
Loading ...
Page | 7 www.lacrossetechnology.com/support 308-1412-3TX
Low Battery Icon
• By indoor temperature: replace batteries in station.
• By sensor channel 1, 2 or 3, replace batteries in that sensor.
Note: You can replace low batteries in only one sensor then hold the
SEARCH button for 3 seconds to search for all sensors. Press the TX
button on the sensors to reconnect.
Restart
A complete restart of the station returns it to default settings, and “out
of the box” condition and may resolve connection issues.
1. Bring all sensors in the house withing 5 feet of the station.
2. Remove batteries from station and all three sensors. Leave out for
15 minutes.
3. Press any button on the station 20 times.
4. After 15 minutes, follow SETUP on page 1.
Position Sensors
Sensors Outside:
• Mount the TX141TH-BCH sensors on a north-facing wall or in
any well shaded area. Under an eave or deck rail is preferred.
• The maximum wireless transmission range to the weather station is
over 300 feet (91 meters) in open air, not including walls or oors.
• Be sure the sensor is mounted vertically
Option 1:
• Install one mounting screw into a wall leaving some extended.
• Place the transmitter onto the screw.
• Gently pull the transmitter down to lock the screw into place.
Option 2:
• Insert the mounting screw through the front of the transmitter and
into the wall.
• Tighten the screw to snug (do not over tighten).
Sensors Inside:
• Wall mount or stand in desired location.
• Avoid placing in sunlight, or near vents which could cause inaccurate
readings.
Loading ...
Loading ...
Loading ...