Arendo 303118 User Manual

Loading ...

56 English

5. Handling

Press the opening buon to open the cover. Then ll the Arendo kele with cold

water and close the cover by pressing down the cover unl it locks.

Important note: On the outside there is a scale. Please make sure not to ll in more

than the maximum level as marked on the scale. If the kele is overlled, boiling

water can be ejected. Put the kele on the base. On the base staon there are

buons for selecng dierent water temperatures. Press the buon which corre-

sponds to your desired temperature. The buon starts ashing. In order to begin

the cooking process, press the “ON / OFF” buon. The LED of the “ON / OFF” buon

switches from green (OFF) to red (ON). As soon as the water reaches the target

temperature, the kele switches o and it will produce a short beep. The heang

element switches o automacally and the process has been completed. Now the

unit can be lied up and the water can be used.

5.1 “KEEP WARM”

The “KEEP WARM” funcon allows you to maintain a specic temperature. Press

“KEEP WARM” and select a temperature. Make sure you are able to select only

70 ° C, 80 ° C or 90 ° C. Once you have selected your desired temperature, press

the “ON / OFF” buon. Then the kele heats up to the previously set value and

holds it.

6. Decaling and cleaning

We recommend decalcifying the kele in regular intervals, depending on the in-

tensity of use. Before cleaning, it is essenal to remove the power plug from the

socket and wait unl the device is completely cooled down. The scale lter is locat-

ed prior to the spout. To remove the lter, open the cover and push the plasc ap

downwards. Then deep clean the taken lter with warm water and insert it into

the holder again. When inserng the lter, take care that the retaining lug is xed

to the guide rail.Only use convenonal decaling agents based on citric acid. Please

follow the manufacturer´s instrucons for dosing the respecve product you have

chosen. The heang element must not be cleaned and never be processed with

sharp or hard objects. For cleaning the outer surface of the kele, only use a damp

cloth. Never use hard or abrasive objects like a wire brush or a steel-sponge for

Loading ...

Arendo 303118 IN SEKUNDENSCHNELLE ZUR GEWÜNSCHTEN TEMPERATUR