Loading ...
19510300500_AUS English, All Logos to be Ariston {PDF Created 18/01/13 22:28:00}
2
Important Information TD4255HL issue 1
Step 1
Open the door of your
dryer.
Step 2
Remove the filter.
Step 3
Open filter and clean
any fluff deposits from
the filter mesh.
Step 4
Refit the filter – Never run
the dryer without a filter.
TD4199HC_1.JPG TD4199HC_2.JPG TD4199HC_3.JPG TD4199HC_4.JPG
Step 1
Pull the water container towards
you and remove it fully from the
dr
y
er
Step 2
Remove either the small or large
cap and Empty the Water from
the Container
Step 3
Refit the Water Container
ensuring that it is pushed fully
back into position...
TD4199HC_5.JPG TD4199HC_6.JPG TD4255HC_1.JPG
Priming the Water Collection System
TD4255_2.JPG
GB
For your Condenser dryer to operate efficiently, you must follow the regular
maintenance schedule shown below:
Fluff Filter – You must Clean the fluff filter after ever
y
drying cycle
Failure to clean the filter after every cycle will affect the drying performance of your
machine – It will take longer to dry and as a result will use more electricity during drying
Water Container
–
You must em
p
t
y
the water container after ever
y
dr
y
in
g
c
y
cle.
Failure to empty the Water Container will result in:
- The machine will stop heating (so the load may be wet at the end of the cycle).
- When the Container is full, the Empty water Icon
will be on, the display will show H2O and the
bottle full icon
will flash.
The Empty Water
Icon
is on to
remind you to
empty the water
container at start
and end of a
programme
When your dryer is new, the Water Container
will not collect Water until the system is
primed, this will take 1 or 2 drying cycles.
Once primed it will collect Water during
every cycle.
Loading ...
Loading ...
Loading ...