Loading ...
Loading ...
Loading ...
6 petsafe.com
Getting Started
Litter Box Setup
1. Find a clean, dry and level location with
a standard power outlet nearby. Insert the
power supply into the connection under the
litter box frame. Push the cord into the clips
on either side of the power connection to
hold it in place.
2. Install the waste trap by aligning the pegs
at the bottom of the waste trap lid with the
notches at the front of the litter box frame.
Push the waste trap lid down until it snaps
into place.
3. Remove the lid and place it under the litter
tray. The lid is extra protection against leaks
and will be used later for disposal.
4. Empty the crystal litter into the litter tray and
spread evenly. For best results, sprinkle one
handful of the litter under the waste trap.
3
4
5
6
1
2
5. Lift the litter box frame and place the litter
tray under it with the waste trap on the tray
below the waste trap lid on the litter box.
6. Lower the litter box frame until you hear a
click, which confirms the magnets on the
waste trap lid have connected to the magnet
contacts on the litter tray.
7. Plug the power adaptor into the wall outlet.
After the rake stops, make sure the Manual
Rake button LED light is solid blue. If the light
is blinking blue, then something has moved
in front of the sensors and the rake cycle is
counting down from 20 minutes.
8. Search for “myPetSafe” in your phone’s app
store and download the app. Locate and
open the app on your smartphone, and
follow the onscreen instructions
7
8
Loading ...
Loading ...
Loading ...