Loading ...
Loading ...
Loading ...
- 5 -
EXTERIOR AND IN-LINE BLOWER SELECTION
CAUTION: To reduce risk of fire and electric shock, install this range hood only with
Best Exterior Blower Models EB6, EB9, EB12 or EB15, and Best In-Line Blower
Models ILB3, ILB6, ILB9 or ILB11. Other blowers cannot be substituited.
INSTALL THE DUCTWORK
NOTE: To reduce the risk of fire, use only metal ductwork.
1. Choose the location where the Exterior Blower or In-Line Blower will be mounted.
See illustrations below for mounting location suggestions and restrictions.
2. A straight, short duct run will allow the hood to perform most efficiently.
3. Long duct runs, elbows and transitions will reduce the performance of the
hood. Use as few of them as possible. Larger ducting may be required for best
performance with long duct runs.
4. After the Exterior or In-Line Blower has been installed, connect round metal
ductwork and work back towards the hood location. Use duct tape to seal joints
between ductwork sections.
OK
OK
SUGGESTED MOUNTING LOCATIONS
EXTERIOR BLOWER
CAUTION: MAY NOT FIT
UNDER EAVES OF SINGLE
STORY HOMES
EXTERIOR
BLOWER
EXTERIOR
BLOWER
10”
ROUND DUCT
HOOD
ROUND
ELBOW
24” TO 30” ABOVE
COOKING SURFACE
FIGURE 1
Loading ...
Loading ...
Loading ...