Best CC45E90SB Riporre 34" Brushed Stainless Steel Chimney Hood

User Manual - Page 16

For CC45E90SB.

PDF File Manual, 60 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
- 16 -
OPERATION
Note: Avoid using food products that produce flames under the range
hood.
Button TC1 (Lights)
Turns the lights on to High intensity, Medium intensity, Lower intensity, and turns
them OFF.
Button TC2
Motor ON/OFF - Activates the blower at low speed.
Button TC3
Activates the blower at medium low speed.
Button TC4
Activates the blower at medium high speed.
Button TC5
Activates the motor at 4th speed.
Button TC6 (TIMER auto power off 10 min.)
Activates the TIMER function at the blower speed that has already been selected. If the
blower is NOT active, it switches on the blower at the low speed and activates the TIMER
function When the TIMER function is active, TC6 light will blink.
Cleaning Mode
Pressing TC1 and TC6 simultaneously for 2 seconds to activate the glass cleaning
function. When the function is active the system does not recognize any key. When the
cleaning Mode is active TC1 and TC6 backlight will stay on. The function will remain on for
maximum 5 minutes. To exit the Cleaning Mode press TC1 and TC6 simultaneously for 2
seconds or wait 5 minutes.
30h filter CLEAN REMINDER
After 30 hours of blower operation, an alarm will signal the need to clean the grease filters.
The filter alarm, activates for 30 sec each time the blower is turned off and TC6 light will
stay on. During this period, it is possible to reset the alarm by pressing the TC6 button for
longer than a second.
120h non duct filter REPLACEMENT REMINDER
After 120 hours of operation, an alarm will signal the need to replace the non duct filters.
The filter alarm, activates for 30 sec each time the blower is turned off and TC6 light will
stay on:
TC6 lighting blinking. During this period, it is possible to reset the alarm by pressing the
TC6 button for longer than a second.
Buzzer
The Buzzer emits a "beep" each time that a command is set from the keyboard or optional
remote control.
HEAT SENTRY™
Your hood is equipped with a HEAT SENTRY™ thermostat. This thermostat is a device
that will turn on or speed up the blower if it senses excessive heat above the cooking
surface.
1) If blower is OFF - it turns blower ON to HIGH speed.
2) If blower is ON at a lower speed setting - it turns blower up to HIGH speed.
When the temperature level drops to normal, the blower will return to its original setting.
WARNING
The HEAT SENTRY thermostat can start the blower even if the hood is turned OFF.
TC1 TC2
TC3
TC4 TC5 TC6
Loading ...
Loading ...
Loading ...