Loading ...
Loading ...
Loading ...
13
Features and Identification
To change light bulbs:
Remove the Glass Light Cover by grasping the
edge of glass and pry it off. It may be neces-
sary to remove one screw. Pull the old bulb
straight out from socket, do not twist.
Replace with 12v, 5 watt bulb of similar pin type
socket design and always avoid touching the
glass of new bulbs.
NOTE: Use only pin style 12v. 5 watt bulbs.
Replacing Ignition Batteries
Glass Light
Cover
Rev. 04/2005
Professional and Premier Models
Locating the battery: The battery is located in a sealed compartment on the left-hand side of the
control panel.
To change the battery:
1. Disengage the battery compartment by pushing the battery cover
up on Professional models and towards the front of the grill on Premier
models (as shown).
(Note: The directional arrow on the battery cover indicates which direction to push and disen-
gage)
2. The battery compartment will disengage and protrude so that you may pull and remove the bat-
tery and battery compartment.
3. Pull and remove the battery and battery compartment completely.
4. With the battery compartment removed you may remove and replace
the 9-volt battery.
5. After inserting the 9-volt battery into the battery compartment, insert
the battery compartment into the battery compartment slot and gently
push with your index finger until it engages.
Loading ...
Loading ...
Loading ...