Loading ...
Loading ...
Loading ...
22
Steam Cycles
Use Steam Cycles to help smooth out wrinkles from dry items, such
as clothes that have been worn or clothes that have been left in the
dryer too long. When a Steam Cycle is selected, the estimated time
remaining display shows the actual time remaining in the cycle.
NOTE: Results may vary depending on fabric. 100% cotton
garments with wrinkle-free finish may yield better results than
those without.
Use of a fabric softener sheet is not r
ecommended with steam
cycles as it may cause temporary staining on the clothes.
Quick Refresh
This cycle is best for smoothing out wrinkles and reducing odors
from loads consisting of one to four dry items of wrinkle-free cotton,
cotton-polyester blend, common knits, and synthetic garments. In
this cycle a small amount of water is sprayed into the dryer drum
after several minutes of tumbling with heat. The dryer will continue to
tumble with heat followed by a brief cool down. The heat level and
cycle time are not adjustable.
Enhanced Touch Up
This cycle is best for touching up clothes that have been left in the
dryer too long. In this cycle, a small amount of water is sprayed into
the dryer drum after several minutes of tumbling with heat. The dryer
will continue to tumble with heat followed by a brief cool down. The
dry time and temperature can be adjusted for this cycle.
NOTE: Overloading the d
ryer may not yield the same results.
Steam Preset Cycle Settings
Timed Cycles
Load Ty
pe
Default
T
emperature*
Default Time
(Minutes)*
QUICK REFRESH
Helps to smooth out
wrin
kles and reduce odors
from loads consisting of one
to four dry items.
Medium
15
ENHANCED TOUCH UP
Helps to smooth out
wrinkles in loads left in the
dryer for an extended
period.
Medium 20
*Temperature and Time Adjust are selectable only for the
Enhanced Touch Up Cycle.
NOTE: The
Enhanced Touch Up cycle has a minimum dry time
of 15 minutes and a maximum dry time of 40 minutes.
Only the
Medium and High temperature settings can be used for the
Enhanced Touch Up cycle.
Timed Cycles
Use Timed Cycles to select a specific amount of drying time and a
drying temperature. When a Timed Cycle is selected, the Estimated
Time Remaining display shows the actual time remaining in your
cycle. You can change the actual time in the cycle by pressing the
Time Adjust up or down arrows. See “Changing Cycles, Modifiers,
and Options.”
NOTE: Timed
Cycles may also be used with the drying rack. See
“Drying Rack.”
Timed Dry
Use this cycle to complete drying if items are still damp after an
Automatic Cycle. Timed Dry is also useful for drying heavyweight
and bulky items, such as bedspreads and work clothes. Lightweight
garments, such as exercise wear, can be dried using Timed Dry on a
low temperature setting.
Timed Preset Cycle Settings
Timed Cycle
Load Ty
pe
Default
T
emperature
Default Time
(Minutes)
TIMED DRY
Heavyweight, bulky items,
work
clothes
High 40
Modifiers
Automatic Cycle Modifiers
Use the Dryness Modifier to select dryness levels for the Auto Dry
Cycles. Press DRYNESS until the desired Dryness setting
illuminates.
The preset dryness setting is Normal when an Automatic Cycle is
sel
ected. You can select a different dryness level, depending on your
load, by pressing Dryness and choosing More, Normal, Less, or
Damp. Selecting More, Normal, Less, or Damp automatically adjusts
the dryness level at which the dryer will shut off. Once a dryness
level is set, it cannot be changed without stopping the cycle.
NOTE: Dryness Level selections cannot be used with the Timed
Cycles.
Timed Cycle Modifiers
Use the Temperature Modifier to select temperatures for the Timed
Cycles. Press TEMP until the desired temperature setting
illuminates.
NOTE: Temperature modifiers cannot be used with the Auto Dry
Cycles.
Loading ...
Loading ...
Loading ...