Loading ...
Loading ...
Loading ...
19
DRYER USE
Starting Your Dryer
WARNING
Explosion Hazard
Keep ammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
ammable on it (even after washing).
Failure to follow these instructions can result in death,
explosion, or re.
WARNING
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death
or re.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
This manual covers several different models. Your dryer may not
ha
ve all of the cycles and features described.
Follow these basic steps to start your d
ryer. Please refer to specific
sections of this manual for more detailed information.
1. Cle
an lint screen before each load. See “Cleaning the Lint
Screen.”
2. Place laun
dry into dryer and shut door.
3. Pr
ess POWER.
4. T
urn the knob to the selected cycle. The preset settings for
Automatic Cycles or Timed Cycles will illuminate. The estimated
(automatic cycle) or actual (timed) cycle time (in minutes) will show
in the display.
NOTE: A default time is displayed when an automatic cycle is
selected. During the first few minutes of the drying process,
the cycle time may automatically vary from the default time
based on the size and fabric type of the load. Toward the end
of the drying process, the estimated time display will adjust
again, showing the final drying time.
To use an Automatic Cycle
■ Press POWER.
■ Turn the knob to desired Automatic Cycle.
■ Select DRYNESS to adjust how dry you want the load. As
the cycle runs, the control senses the dryness of the load
and adjusts the time automatically for the selected dryness
level.
The default dryness setting is Normal when an Automatic
Cyc
le is selected. You can select a different dryness level,
depending on your load, by pressing Dryness and
choosing More, Less, or Damp. Selecting More, Less, or
Damp automatically adjusts the sensed time needed.
Once a dryness level is set, it cannot be changed without
stopping the cycle.
■ Select the desired Options.
To make changes during an
Automatic Cycle:
■ Press PAUSE/CANCEL.
Loading ...
Loading ...
Loading ...