Loading ...
Loading ...
Loading ...
Problem Possible solution
The App frequently cannot connect to the
dryer.
Try to move the home router as near the
dryer as possible or consider purchasing
a wireless range extender.
Turn the microwave off. Avoid using the
microwave and the Remote Control of the
oven at the same time. The microwaves
disrupt the Wi-Fi signal.
The display shows .
If you want to set a new programme, de‐
activate and activate the appliance.
Make sure that the options are suitable
for the programme.
The display shows Error code (e.g. E51). Deactivate and activate the appliance.
Start a new programme. If the problem
occurs again, contact the Service centre.
1)
After maximum 5 hours, the programme ends automatically.
2)
It can happen that some area remains humid when drying big items (e.g. bed sheets ).
14.1 If the drying results are not
satisfactory
• The set programme was incorrect.
• The filter is clogged.
• The Heat Exchanger is clogged.
• There was too much laundry in the
appliance.
• The drum is dirty.
• Incorrect setting of the conductivity
sensor ( See chapter "
Settings -
Adjustment of the remaining laundry
moisture degree
" for better setting).
• The airflow slots are clogged.
• Room temperature is too low or too
high ( optimal room temperature 19°C
to 24°C )
15. TECHNICAL DATA
Height x Width x Depth 850 x 600 x 600 mm (maximum 665 mm)
Max. depth with the appliance door open 1100 mm
Max. width with the appliance door open 950 mm
Adjustable height 850 mm (+ 15 mm - feet regulation)
Drum volume 118 l
Maximum load volume 8 kg
Voltage 230-240 V
Frequency 50 Hz
Total power 900 W
Type of use Household
Permitted ambient temperature + 5°C to + 35°C
ENGLISH 23
Loading ...
Loading ...
Loading ...