Loading ...
Loading ...
Loading ...
may takes about 45 seconds before it is
ready. When the wireless module is
ready, the text (Access Point) is on
to inform you, that the access point will
be open for about 3 minute.
4. Configure the
My Electrolux app on
your smart device.
5. If the connectivity is configured,
(Access Point) symbol is off and the
icon
will stop blinking and lit
steadily to confirm that the
configuration was successful.
Every time you switch
the appliance on, the
appliance takes 45
seconds to connect to
the network
automatically. When the
indicator stops
blinking the connection
is ready.
To switch the wireless connection
off,Press and hold Remote touch
button for 3 seconds until the first
acoustic signal: appears on the
display.
If you switch the appliance
off and on again, the
wireless connection is
automatically off.
To remove the wireless
credentials,Press and hold Remote
touch button for 10 seconds until the
second acoustic signal:
appears on the display.
6.3 Remote Start
When the App is installed and the
wireless connection is complete, you can
start and stop a drying programme
remotely by activate remote start.
The Remote Control
activates automatically when
you press the Start/Pause
button to start the
programme, but it is also
possible to start a drying
programme
Activate Remote Start
1. Press the
Remote button and the
indicator appears on the
display.
2. Press the Start/Pause button to
activate the Remote Start.
The indicators appears on the
display. Now it is possible to start the
programme remotely.
Deactivate Remote Start
Press the Remote touch button and
confirm by pressing the Start/Pause
button.
The icon is off and the remote start is
deactivated.
If the door is open, the
Remote Start
is
deactivated.
6.4 Over-the-air update
The App may propose an update for
downloading new features.
The update is accepted via App only.
If a programme is running, the App
notifies that the update will start at the
end of the programme.
During the update, the appliance shows
in the display.
The appliance will usable again at the
end of the update, without any
notification about successful update.
If an error occurs, the appliance shows
in the display: just press any
buttons or turn the knob to return to
normal use.
ENGLISH 11
Loading ...
Loading ...
Loading ...