Loading ...
Loading ...
Loading ...
Frequently Asked Questions
61
The drying cycle duration is very long
Problem Possible cause and solution
The drying process
goes on too long or
even switches off.*
The room where the tumble dryer is located is too
warm.
Ventilate the room thoroughly.
Detergent residue, hair, and fine lint can clog the fil-
ters.
Clean the lint filters and the plinth filter.
Remove visible lint
– at the bottom left, behind the panel in the heat
exchanger cavity (see “Cleaning and care”)
– at the bottom right of the cooling fins behind the
grille (see the end of this section)
The laundry is unevenly distributed or has rolled up.
The drum is too full.
Untangle the laundry and remove a few items.
Start a program.
The cool air intake (bottom right grille) is blocked.
Move any objects, such as a laundry basket, away
from the dryer.
The laundry is too damp.
Spin using a higher spin speed in the washing ma-
chine.
Metallic components, e.g., zippers, have prevented
the dryer from registering the correct moisture level.
Open the zippers next time.
If the problem recurs, dry these items using the
Time Dry program.
* Switch the tumble dryer off and on again before starting a new program.
Loading ...
Loading ...
Loading ...