Loading ...
Loading ...
Loading ...
4. Selecting program settings
31
Set a time value of 00:00 h with the
sensor buttons. Confirm with the
OK sensor button.
The selected delay-start period has
been canceled.
After the program has started, the se-
lected delay-start period can only be
changed or canceled by interrupting
the program.
Adding laundry during ongoing Delay
Start period
Follow the description in “Changing
the program sequence – Adding or
removing laundry”.
SmartStart
The SmartStart function lets you de-
fine a time period during which your
dryer will start automatically. The start
takes place via a signal, e.g., from
your energy supplier, that indicates
that the electricity rate is particularly
economical. Please check with your
local utility provider for availability.
This function is active when the Smart-
Grid setting is switched on.
The time period can be defined be-
tween 15minutes and 24 hours. During
this period, the dryer waits for the sig-
nal from the energy supplier. If no signal
is sent during the defined period, the
dryer starts the drying program.
Setting the timeframe
If you have activated the SmartGrid
function in Settings, SmartStart in in-
stead of Start in will appear in the dis-
play when you touch the sensor
button (see “Settings – SmartGrid”).
The procedure for setting this is the
same as for setting the time for delay
start.
Use the sensor buttons to enter
the hour and confirm your entry with
the OK sensor button.
The hour will be saved and the minute
number block will be highlighted.
Use the sensor buttons to enter
the minutes and confirm your entry
with the OK sensor button.
Press the Start/Add laundry sensor
button to start the drying program
with SmartStart.
The following will appear in the display:
OK
SmartStart
Loading ...
Loading ...
Loading ...