Loading ...
Loading ...
3
Electrical Safety
1. Always check that the power supply corresponds to the
voltage on the rating plate.
2. Do not operate in an area where there is a possibility
of bodily contact with grounded items (i.e. pipes, metal
structures, etc.). Avoid contact with metal objects when
the device is in use.
3. Do not pull or yank the power cord. Keep the power cord
away from hot surfaces and sharp objects.
4. Do not operate the machine where water is present (i.e. do
not use in rain, near sprinklers, or in puddles).
5. Do not touch electrical plugs with wet hands.
6. Keep the extension cord away from the moving parts and
the hot motor housing.
7. Immediately replace and dispose of damaged wires
and plugs.
8. Do not open the switch box on the motor. If service is
necessary, take the machine to a qualied electrician.
9. Avoid unintentional starting – Do not carry
plugged-in appliance with nger on the switch. Make sure
the switch is o before plugging in the appliance.
10. Do not abuse the cord – Never carry the appliance by its
cord or yank it to disconnect it from the receptacle. Keep
the cord away from heat, oil, and sharp edges.
11. Do not force the appliance – It will do the job better and
with less likelihood of a risk of injury if it is used at the rate
for which it was designed.
12. Do not overreach – Keep proper footing and balance
at all times.
13. Stay alert – Watch what you are doing. Use common
sense. Do not operate the appliance when you are tired.
14. Disconnect the appliance – Disconnect the appliance from
the power supply when it is not in use, before servicing it,
and when changing accessories.
15. Store idle appliances indoors – When not in use,
appliances should be stored indoors in a dry and high
or locked-up place out of the reach of children.
16. Maintain appliance with care – Inspect extension cords
periodically and immediately replace them if they are
damaged. Only use an authorized service facility to
repair the appliance. Keep the handles of the unit dry,
clean, and free from oil and grease.
17. Check for damaged parts – Before using the
appliance, carefully check the device to conrm that it
will operate properly and perform its intended function.
Check for alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any other
condition that may aect its operation. Any part that is
damaged should be properly repaired or replaced by an
authorized service center unless indicated elsewhere in
this manual.
mCAUTION! Extreme temperature conditions may
damage the tubes, the ash lter, or the vacuum canister.
Completely empty the vacuum cleaner and the ash lter in a
safe area after cleaning.
Observe the following warnings that appear on the motor
housing of your ash vacuum:
mWARNING! To reduce the risk of electric shock, do
not use outdoors or in damp or wet environments. Do not
expose to rain. Store indoors in a dry place.
mWARNING! For your own safety, read and
understand the operator’s manual. Do not run the unit
unattended. Do not pick up hot ashes, coals, toxic
substances, ammable materials or other hazardous
debris. Do not use the device in an area with explosive
liquids or vapors.
• To reduce the risk of electric shock, unplug the unit before
cleaning or servicing.
• Do not use the ash vacuum without pleated lter and wire
lter basket in place.
mCAUTION! To reduce the risk of injury from moving
parts, unplug the unit before servicing.
Application
This motor-operated ash vacuum is intended for vacuuming
cold ashes and ne dust material from replaces, wood/
coal-red ovens, ashtrays, repits and barbecues. This
equipment is not suitable for vacuuming liquids, soot or
cement dust or for vacuuming heating boilers or oil-burning
ovens. Vacuuming of glowing embers or materials and dusts
that are combustible, explosive or hazardous to one’s health is
prohibited. The manufacturer will not be held responsible for
injuries resulting from incorrect use of the device or from use
that does not comply with the directions.
NOTE: This ash vacuum is intended for household use
only.
Polarization Instructions
To reduce the risk of electric shock,
this appliance has a polarized plug
(one blade is wider than the other).
This plug will t in a polarized outlet
only one way. If the plug does not t
fully in the outlet, reverse the plug. If
it still does not t, contact a qualied
electrician to install the proper outlet.
Do not change the plug in any way.
(A) (B)
METAL SCREW
3-TO-2 ADAPTER
COVER OF GROUNDED
OUTLET BOX
UNGROUNDED
2-PINS PLUG
GROUNDING METHOD
Loading ...
Loading ...
Loading ...