Loading ...
Loading ...
Loading ...
|
23
Gas Requirements
Replace the nozzle using the conversion set supplied with the range
or by a Tecno authorized parts warehouse. Each nozzle has a number
indicating its ow diameter printed on the body. Consult the table
on “Specications Technical data “ paragraph for matching nozzles
to burners.
Air adjustment is not needed.
STEP 4 (FOR ALL-GAS RANGES ONLY): BROILER BURNER
Loosen the 2 screws on left and right sides and pull out the
burner from its support burner from its support.
ATTENTION: pay extra attention to avoid damage to the
igniter and thermocouple.
Using a 7 mm or 10 mm sochet wrench to unscrew the nozzle.
Replace the nozzle using the conversion set supplied with the
range or by a Tecno authorized parts warehouse. Each nozzle
has a number indicating its ow diameter printed on the body.
Consult the table on “Specications Technical data “ paragraph for
matching nozzles to burners.
ATTENTION: Air adjustment is not needed.
STEP 5 (FOR ALL-GAS RANGES ONLY): VISUAL CHECKS
Before reinstalling the bottom panel, the following visual check
must be performed to ensure that the conversion has been
carried out properly and without damage to other components
of the range.
OVEN IGNITER AND THERMOCOUPLE POSITION
The appropriate gap between the tip of the spark plug or
thermocouple and the burner shall be approximately 1/8’’.
For 24” and 30” range’s
Loading ...
Loading ...
Loading ...