Loading ...
BEFORE THE FIRST USE
Remove all packaging and any promotional labels
or stickers from your waffle plates. Be sure that
both of your new waffle plates have been included
before discarding any packaging materials. You
may want to keep the box and packing materials
for use at a later date.
Before using your Cuisinart
®
Griddler
®
Waffle Plates
for the first time, wipe with a damp cloth to remove
any dust from the warehouse or shipping.
Note: The Cuisinart
®
Griddler
®
Waffle Plates have
been treated with a special nonstick coating. Before
the first use, we suggest you season the grids with
cooking spray or flavorless vegetable oil. If using
oil, apply oil with a paper towel or pastry brush.
You may find it helpful to repeat this process before
each use of the waffle plates.
Note: The Cuisinart
®
Griddler
®
Waffle Plates are
designed to fit Griddler
®
and Griddler Gourmet
®
models only.
All materials that come in contact with food are
BPA free.
ASSEMBLY INSTRUCTIONS
Place the closed Griddler
®
or Griddler Gourmet
®
on a clean, flat surface where you intend to use it.
To insert waffle plates
1. Adjust the Griddler
®
or Griddler Gourmet
®
to
the flat position with the controls directly in
front of you.
2. Insert one plate at a time. Each plate is
designed to fit in either the upper housing
or the lower housing of the unit.
3. Locate the metal brackets at the center of the
lower housing. Tilt the back
end of the plate and line
up the cutouts at the back
of the plate with the metal
brackets.
4. Slide the plate underneath
the brackets and push
down the front end of the plate. It will snap into
place.
5. Insert the second plate into the upper housing
as you did with the first plate.
To remove waffle plates
1. Once the Griddler
®
or Griddler Gourmet
®
has cooled, adjust to the flat position.
2. Locate the plate release
button on one side of the
unit. Press firmly on button
and plate will pop up slightly
from the base.
3. Grasp the plate with two
hands, slide it out from
under the metal brackets
and lift it out of the base.
Press on the other plate
release button to remove
the other waffle plate in
the same manner.
OPERATING INSTRUCTIONS
1. Plug the power cord into a standard electrical
outlet.
2. Turn the Selector dial to the left to choose the
Griddle function. The red indicator light on the
Selector dial will illuminate to signal that the
power is on.
3. Set the Griddle dial to 400°F:
4. Allow the unit to heat up. When it has reached
the selected temperature, the green indicator
light will illuminate. You are now ready to begin.
Note: The first time you use your waffle plates
you may notice a slight odor or some smoke.
This is normal and common for plates with a
nonstick surface.
5. Lift top cover of the Griddler
®
or Griddler
Gourmet
®
by grasping the handle and pushing
up in one fluid motion. The top cover will stay
open in a 100° position until you lower it.
6. Pour enough batter onto the center of the
lower waffle grid to completely cover (about
1¼ cups). Use a heat-proof spatula to spread
batter evenly over the grid. Close the top cover.
The green light will turn off, but the red light will
stay illuminated.
2
Loading ...
Loading ...
Loading ...