Loading ...
Loading ...
Loading ...
7
properly tted.
Edger Guide + Flower Guard
1. To use the edger guide + ower guard, ip it down from its
stored position (Fig. 5).
2. The edger guide + ower guard can be ipped up so it
stores against the motor housing for convenient storage,
when not in use (Fig. 5).
Adjusting the Telescopic Shaft
1. Loosen the telescopic shaft adjustment knob.
2. Pull and adjust the shaft to a comfortable height (Fig. 6).
3. Tighten the knob once the desired length is achieved
(Fig. 6).
Adjusting the Angle of Cutting Head
mWARNING! Always unplug the trimmer + edger before
making any adjustments to the trimmer + edger.
1. Slide the locking lever down and hold (Fig. 7).
2. Twist the operation handle to the desired position.
3. Release the locking lever.
mWARNING! Never use steel, wire, rope, string, or other
materials as cutting line. Other materials can break o during
cutting and become a dangerous missile that can cause
serious injury.
Application
Replacing the Spool
1. Disconnect the main plug.
2. Press together both locking device tabs on the spool
cover and remove the cover (Figs. 8-9).
3. Remove the spool from the spool cover (Fig. 10).
4. Remove the spring and clean out any dirt or grass residue.
Screws
Fig. 4
Edger guide +
ower guard
Fig. 5
Telescopic shaft
adjustment knob
to tighten
the knob
Fig. 6
90°
180°
Fig. 7
Locking lever
Locking
devices
Spool
cover
Spool
Fig. 8
Loading ...
Loading ...
Loading ...