Loading ...
Loading ...
Loading ...
6
Unpacking
Carton Contents
• Grass trimmer + edger
• Safety guard
• Auxiliary handle
• Handle bolt and screws
• Manual with registration card
1. Carefully remove the electric grass trimmer + edger and
check to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the electric grass
trimmer + edger. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations or save the packaging
for long-term product storage.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suocation
risk!
Assembly
Before using the electric grass trimmer + edger, follow these
instructions to assemble:
NOTE: Observe correct mains voltage – The voltage of
the power source must match the voltage specied on the
nameplate of the unit.
Fitting Auxiliary Handle
1. Remove the trimmer + edger and parts from the box.
2. Place the handle on the tool as shown (Fig. 1).
3. Adjust the handle to the most comfortable position.
4. Assemble the auxiliary handle on the machine by inserting
the handle knob into the auxiliary handle and tightening
the handle with the bolt provided (Fig. 2).
5. Make sure that the handle assembly is tightly xed to the
machine body.
Fitting the Safety Guard
mWARNING! The guard must be properly installed.
The guard provides partial protection from the risk of thrown
objects to the operator and other bystanders.
1. Unplug the tool and remove the screws from the motor
housing.
2. Place the safety guard in the direction of the arrow shown
to align it with the screw holes on the motor housing
(Fig. 3).
3. Firmly press the safety guard into place and secure it to
the trimmer head with the screws provided (Fig. 4).
NOTE: Never use the tool unless the safety guard is
Auxiliary handle
Fig. 1
Handle knob
Bolt
Fig. 2
Safety guard
Fig. 3
Loading ...
Loading ...
Loading ...