Loading ...
Loading ...
Loading ...
10
Cutting Grass
1. Move the grass trimmer + edger left and right, keeping it
a safe distance away from the body. The trimmer + edger
can eciently cut grass up to a height of 6 in. (15 cm). Cut
higher grass in stages.
2. When using the trimmer + edger, hold it at an angle of
about 20° to the ground (Fig. 18) and swing the trimmer +
edger from side to side (Fig. 19).
mWARNING! Do not overload the trimmer + edger
– Cut in small sections to maximize the trimmer + edger’s
eciency and keep the trimmer + edger running at high speed
(Fig. 20).
Trimming Edges
1. Guide the grass trimmer + edger along the edge of the
lawn. Avoid contact with paved surfaces, stone or garden
walls, as this will wear the line rapidly.
2. Use the edge of the guard as a guide when cutting near
fences and walls (Fig. 21).
3. Move the trimmer + edger in a backwards direction when
trimming around edges to avoid damage.
Maintenance
mWARNING! Before performing any maintenance task,
cut o the electric power supply by disconnecting the plug
from the extension cord.
mWARNING! Always wear protective gloves during
maintenance tasks. Do not carry out maintenance when the
engine is running or hot.
mWARNING! Use only original manufacturer’s
replacement parts, accessories and attachments. Failure to do
so can cause potential injury and poor performance.
• Before conducting any maintenance task, make sure the
trimmer + edger is unplugged.
• Only the maintenance operations described in this manual
may be carried out by the user. For repairs that have not
been explained in these instructions, contact an authorized
service center.
• Check all screws regularly to ensure that they are tightly
secured.
• Only use original replacement parts. These spare parts are
designed specically for this device and are the only ones
suitable for replacement. Other replacement parts will not
only lead to an invalidation of the warranty, but also may
endanger you and your environment.
• Do not spray or wet the appliance with water.
• Do not use detergents or solvents as these could ruin the
trimmer + edger. The plastic parts can be easily damaged
by chemical agents.
• If the cutting blade no longer cuts or breaks, replace it by
contacting an authorized service center.
20°
Fig. 18
Fig. 19
X
Fig. 20
Fig. 21
Loading ...
Loading ...
Loading ...