YNED5800HW User Manual

Loading ...

1. Prepare your 3-wire cable

for direct connection

(25 mm)

3½"

(89 mm)

5. Connect remaining wires

4. Connect ground wire

Direct wire cable must have 5 ft. (1.52 m) of extra length so

dryer may be moved if needed.

Strip 3

" (89 mm) of outer covering from end of cable. Strip

insulation back 1" (25 mm). If using 3-wire cable with ground

wire, cut bare wire even with outer covering. Shape wire ends

into hooks.

Connect ground wire (green or bare) (F) of direct wire cable

under green external ground conductor screw (A). Tighten

screw.

Place hooked ends of remaining direct wire cable wires under

outer terminal block screws (hooks facing right). Squeeze

hooked ends together and tighten screws. Finally, reinsert tab

of terminal block cover into slot of dryer rear panel. Secure

cover with hold-down screw. Now go to “Venting Requirements.”

3-Wire Direct Wire Connection

Use where local codes permit connecting cabinet-ground

conductor to neutral wire.

2. Remove center screw

Remove center terminal block screw (B).

3. Connect neutral wire

Place hooked end of neutral wire (white

or center) (C) of direct wire cable under

center terminal block screw (B), hook

facing right. Squeeze hooked end together.

Tighten screw.