User Manual Polk SIGNA S2 OLD Universal Sound Bar & Wireless Subwoofer

• User Manual - (English, French, Spanish, German, Chinese, Italian)

• Product-Information-Sheet-Signa-S2 - (English)
• Spec Sheet (web) - (English)

Table of contents

• What’s in the Box
• Connecting Your Signa S2 to Your TV
• Remote Control
• Sound Bar Top Panel
• Sound Bar Back Panel
• Sound Bar LEDs
• Optimizing Your Listening Experience
• Music Listening
• Auto Standby

Quick Start Guide

What’s in the Box

Connecting Your Signa S2 to Your TV

1. Is an HDMI port on your TV labeled “ARC”?

Connect the included HDMI cable to the HDMI ports labeled with “ARC” on both the TV and the sound bar.

Connect the an Optical cable between the TV and sound bar.

Connect the included HDMI cable to any available HDMI port on the TV and to the “TV ARC” port on the sound bar.

NOTE: HDMI (ARC) and optical supports Dolby 5.1 decoding.

3. Connect the sound bar power cord to an AC outlet

4. Position subwoofer and connect to an AC outlet (for best performance place on the same wall as the TV)

NOTE: The Signa S2 sound bar and wireless subwoofer are preset at the factory to work together. Should your wireless subwoofer stop receiving an audio signal, follow these instructions to re-establish the connection:

3. Simultaneously press and hold Bluetooth and VOL buttons on the sound bar for 5 seconds.

The sound bar will search for a connection while the first and second LEDs on the sound bar will flash intermittently. The lights will stop flashing when the sound bar and subwoofer connect. If the sound bar and subwoofer fail to connect, the first and second LEDs will flash together 5 times. Repeat steps above to establish a connection.

Press the Power button on the sound bar or remote.

NOTE: Make sure TV internal speakers are off

Remote Control

Sound Bar Top Panel

Sound Bar Back Panel

Sound Bar LEDs

The Signa S2 has a horizontal row of LED lights that provide status indications, like source, volume and listening modes.

Optimizing Your Listening Experience

Music Listening

How to Set Up Bluetooth

1. To enable Bluetooth , press the Bluetooth button on the sound bar or remote control. A blue LED will pulse on the sound bar.

2. Go to Bluetooth devices section on your phone, tablet or computer and select Polk Signa S2. The LED is solid blue when Bluetooth is connected.

NOTE: To take control when another device is connected, press Bluetooth button.

How to hear your TV again: When you are finished using Bluetooth, press the source button on the sound bar or remote (TV, AUX).

Auto Standby

Bluetooth standby

1. Press and hold the [TV] button for approximately 5 seconds. (The default setting is “Off”).

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Polk Audio is under license. Other trademarks and trade names are those of their respective owners.