Loading ...
Loading ...
Loading ...
Settings 33
11 Settings
1 Switch the device on using the on/off key.
2 After the initial screen the main menu appears.
3 Use the navigation keys to select Settings.
4 Confirm with OK.
5 Use / to select from the following settings.
6 Confirm with OK.
7 Modify the settings using OK, /,
8 Confirm with OK.
The ¿ key takes you one step back in the menu.
Overview of the Menu
Functions
Wireless and Network
WiFi – switching the wireless network (WLAN) off and
on.
Network Selection – select the wireless network with
which the device is to connect.
WiFi Hot Spot – activate and deactivate WLAN teth-
ering.
LAN – switching the LAN network (LAN) off and on.
Advanced – (LAN mode only) check the Network
actual IP address or change the address by inputting
new address. You can also select Automatic or Use
static IP
DLNA Sharing – switching DLNA off and on.
Bluetooth – switching the Bluetooth connection off
and on.
Image settings
3D – set the picture modes with 2D/3D options.
Keystone – use / to set the keystone.
Fit Screen – use / to select the screen mode
Projection mode
Front – normal projection; the device is located in
front of the projection surface/screen
Rear – rear projection; the device is located behind
the projection surface; the image is reflected hori
-
zontally.
Front Ceiling – the device is hanging from the ceiling
in an upside-down position; the image is rotated by
180 degrees.
Rear ceiling – the device is located behind the pro-
jection surface, hanging from the ceiling in an upside-
down position; the image is rotated by 180 degrees
and reflected horizontally.
Wall color correction – colour correction of the pro-
jected image to adjust to coloured projection surfaces
Smart Settings – select predefined settings for bright-
ness / contrast / colour saturation. If you modify these
settings, the setting is switched to Manual.
Brightness – use / to adjust the brightness and
press OK to confirm.
Contrast – use / to adjust the contrast and press
OK to confirm.
Advanced
Colour temperature – set to Warm to enhance
hotter colors such as red, or set to Cool to make
picture bluish.
Smart Brightness – use / to adjust the smart
brightness and press OK to confirm.
Dynamic contrast – adjusts the contrast to keep it
at the best level according to the brightness of the
screen.
Color space – to convert the color space setting to
another standard.
Gamma – adjusts the gamma correction according
to the type of the projected image.
Sound Settings:
Volume – adjust the volume
Deep Bass – switching the deep bass on and off
Wide sound – switching the wide sound on and off
Equalizer – select the equalizer mode
Smart volume – turn on/off the volume level automatic
control function
Key beep – turn key tones on and off
Speaker – switching the speaker on and off
System settings
Date and time – set date and time
Android Settings – set Android system
Sleep mode – With this function, the projector auto-
matically goes to ECO mode after a specified period of
time or at the end of a movie.
Auto Power Down – turn on/off the sleep mode.
The default setting is off.
LU Screeneo_EN.book Page 33 Jeudi, 11. décembre 2014 8:37 08
Loading ...
Loading ...
Loading ...