Loading ...
Loading ...
Loading ...
16 Philips · HDP15x0 & HDP15x0TV
8 On the Screeneo projector, to check that it is turned
off (OFF).
9 Remove the digital media on your computer and
insert it into the port of Screeneo for your digital
media.
10
11 Long press the ON/OFF button on the projector to
turn it on.
12 After the initial screen, the main menu appears. Use
the navigation keys to select Settings.
13 Confirm with OK.
14 Use / to select Maintenance.
15 Confirm with OK.
16 Use / to select Firmware Update.
17 Confirm with OK.
18 Use / to select Install.
19 Confirm with OK.
20 The device turns off and on again. After around 5
minutes the Language Selection screen appears. The
firmware update is now completed.
Copy the software on digital
media (eg USB-stick)
Use the USB ports on the projector to insert digital
media.
1 Use / to select APPs.
2 Confirm with OK.
3 Use / to select Explorer.
4 Confirm with OK.
5 Use / to select Internal Flash.
6 Confirm with OK.
7 Use to select Download.
8 ScreeneoWLink_Setup.exe file appears in the main
window.
9 Press long OK button on the remote control.
10 Use / to select Copy.
11 Confirm with OK.
12 Use //À/Á you move on to the digital
media that you have connected.
13 Confirm with OK.
14 Press long OK button on the remote control.
15 Use / to select Paste.
16 Confirm with OK.
17 ScreeneoWLink_Setup.exe file is copied to the digi-
tal media. Wait that it appears in the browser win-
dow before removing the digital media projector.
Install the ScreeneoWLink
software on my computer
1 Insert the digital media containing the Screene-
oWLink_Setup.exe file on an appropriate port on
your computer.
2 On desktop PC or laptop, select the digital media
containing the file and double click the executable.
3 Follow the instructions that appear on the screen.
4 Agree to have the ScreeneWLink icon on your desk-
top.
5 When installation is complete, restart your com-
puter.
Link your projector and computer
with WiFi
Both devices must be connected to the same access
point, no other network connection must be activated.
As a precaution, note the name and the key to protec-
tion of your access point.
On the Screeneo,
1 Use / to select Settings.
2 Confirm with OK.
3 Using / select Wireless and Networks.
4 Confirm with OK.
5 Using / select WIFI.
6 Confirm with OK.
7 Using / select the desired wireless network.
8 Confirm with OK.
9 If your network is protected by a password, a win-
dow appears. Select the input field with the naviga-
tion buttons on the remote and press OK.
A virtual keyboard appears, using the navigation keys
on the remote control, witch a mouse or external
keyboard.
Enter your password.
10 Click Connect.
DANGER!
Inserting the digital media!
Never pull out the digital media while the
device is accessing it. This could cause data
to be damaged or lost.
Switch the device off in order to make sure
that the device does not access the
memory card.
Notice
If an error occurs during the firmware update
process retry the procedure or contact your
dealer.
LU Screeneo_EN.book Page 16 Jeudi, 11. décembre 2014 8:37 08
Loading ...
Loading ...
Loading ...