Loading ...
Loading ...
Loading ...
- 15 -
FIG. 22
FIG. 23
INSTALL FILTERS
DUCTED AND NON-DUCTED HOODS
NOTE: prior to use, remove protective film
from the filter frame.
1. To remove the GREASE filter, pull down
on latch tab to disengage the filter from
the hood. Tilt the filter downward and
remove (Fig.22).
2. To install the GREASE filter, align rear
filter tabs with slots in the hood. Pull
latch tab down. Push filter into place and
release tab. Make sure the filter is
securely engaged after installation.
NON-DUCTED HOODS ONLY
1. To remove the CHARCOAL filter, grip and
push filter tab toward rear of hood. Pull
the filter down to disengage the rear filter
tabs (Fig.23).
2. To install the CHARCOAL filter, align filter
in rectangular opening. Push filter against
springs in rear of hood and press into
place. Make sure the filter is securely
engaged after assembly.
3. Install GREASE filter after charcoal filter
is installed.
4. The charcoal filter replacement model is
AFCWC345.
Loading ...
Loading ...
Loading ...