Loading ...
Loading ...
Loading ...
Page | 19
Professional Remote Monitoring Station
LTV-TH3 Thermo-Hygro Sensor
1. Install 2-AA batteries according to polarity and replace battery cover. The blue LED light will flash
when transmitting.
Mounting:
1. Use the hole at the top to hang your sensor from the back using a nail. Or, insert one mounting screw through
the front of your sensor.
2. Mount your sensor on a north-facing wall or in any shaded area. Under an eave or deck rail is preferred.
3. The maximum wireless transmission range to the weather station is up to 400 feet (121 meters) in open air,
not including walls or floors.
4. Be sure your sensor is mounted vertically, to allow moisture to drain out properly.
5. For online video instruction visit: http://bit.ly/TH_SensorMounting
LED Light
AA
+
-
AA
+
-
Battery Cover
Hole for
mounting
TX
F/C
∙ Press TX to send a signal
∙ Press F/C to select Fahrenheit
or Celsius display on sensor.
V40A-PRO station:
1. Insert the power cord into a wall outlet, then into your station.
Optional: insert 3 AA batteries* into your station to maintain time/date in the event of a power outage.
*Battery operation only will not update sensor or Wi-Fi data. Power cord is required.
Mounting:
• Use the mounting holes on the back to place your station on a wall.
• Use the pull down stand on the back of your station to place on a desk or counter.
NOTE: You will want to place your station near an outlet, as the power cord is required for operation. Also, you will want
to mount or place this station within good Wi-Fi range of your wireless router. This will help when using all of the remote
monitoring options the La Crosse View™ app has to oer.
Optional
Batteries
Power
Cord
AA
AA
+
-
AA
+
-
+
-
Loading ...
Loading ...
Loading ...