Loading ...
Loading ...
Loading ...
5
PARTS
1. Thermostat light
2. Steam pipe
3. Water tank release button
4. Steam trigger
5. Hose clip
6. Control panel
7. On/o button
8. Low water light
9. Anti-scale lter warning light/reset button
10. Steam control
11. Reservoir
12. Plug storage socket
13. Cover
14. Anti-scale lter
BEFORE FIRST USE
• Remove any labels, stickers or packaging from the iron and soleplate.
• Before using the iron for the rst time, or if it’s not been used for a long time, iron a scrap piece of
cotton (an old towel is ideal) to remove any accumulated residues.
• Don’t worry if the iron smokes a bit at rst, it will soon stop as the manufacturing residues evaporate.
AUTO SHUTOFF
If you don’t press the steam trigger for 10 minutes your iron’s auto shut-o feature will operate. The
thermostat light and the on/o button will ash to tell you that it is in auto shut-o mode. To cancel the
auto shut-o mode, press the steam trigger. Note that your iron will need time to heat up again to the
selected temperature. Wait until the temperature light has stopped ashing before resuming ironing.
FILLING/REFILLING
• Don’t add anything to the water and don’t use water with anything added to it. When the water is
converted to steam, chemicals, perfume, and other additives will coat the inside of the steam
chamber, shortening the life of the iron.
1. Press the water tank release button and pull the water reservoir away from the body of the steam
generator (g. A).
2. Fill the reservoir to the max mark. Do not exceed the max mark.
3. Ret the reservoir into the base unit pushing it in until it clicks.
• A warning light (d)will come on and the unit will beep twice when the reservoir needs relling. If the
reservoir is empty, the steam function will stop working after one minute, however, you can still use
your iron without steam.
PRELIMINARY SETTINGS
1. Put the iron on top of the base unit.
2. Put the plug into the power socket (switch the socket on, if it’s switchable).
3. Turn the unit on by pressing the on/o button.
USING
The temperature of your iron is safe to use on all ironable fabrics and garments.
Dry ironing
1. Set the steam control to n..
2. When the temperature light stops ashing your iron is ready to use.
Loading ...
Loading ...
Loading ...