Loading ...
Loading ...
Loading ...
HOW TO USE POWER SAVING/
ENERGY EYE FUNCTION
www.cuckooworld.com
ENGLISH
What is power saving in “Standby” mode?
If power cord is not unplugged, little bit of electricity will be still wasted. It is called standby electric power.
The power saving of "Standby"mode is technology which minimizes this electricity consumption.
How to start power saving
When Cancel button is pushed for 2 seconds at
waiting state, Saving power function is set up.
Automatic Method
If the standby time is chosen as number other than “0” at the automatic power saving mode, the automatic
saving power function will be operative.
If you move lid handle or push any button before passing waiting time, the waiting time which is reduced will go
back to the setting.
Manual Method
How to end power saving
Method 1) Push any button then it will be returned
to waiting mode.
Method 2) If lid handle is turned to open or close,
power saving mod will be canceled and
back to waiting Mode.
1. If you push “mode” button 7 times at the standby state, automatic power
saving mode is set up.
2. When automatic power saving mode is set up, it says that this is automatic
power saving mode. Press the “Set” button after selecting waiting time.
3. If you select “0” minute with “Menu/ Selection” button, Automatic saving will
be canceled. After setting up waiting time you want, press the “Set” button.
4. Without pressing any button within 7 seconds or pushing “Cancel” button,
Automatic power saving function will be canceled and go back to waiting
mode.
Energy Eye function
The luminance sensor automatically recognizes ambient brightness during standby, cooking, warming and preset
timer for minimizing power consumption of the product. If you want the power saving mode to start when it's darker
than the current level(Step 2), set the mode to Step 1. If you want the mode to start when it's brighter than the
current level, set the mode to Step 3. (The power saving mode of CUCKOO is set to Step 2 at the factory.)
1. Press the Mode button 12 times in standby status and you will enter the Energy Eye mode. (Please make sure
that you press the Mode button for a second or longer in the beginning.)
2. When you enter the mode, a voice comes up saying "You have entered the Energy Eye mode. Please select or
deactivate the Energy Eye mode with Selection button and press SET button.” After that, Menu/Selection button
blinks and Mode, SET and Cancel buttons light.
3. Each time you press the Menu/Selection button, the Energy Eye shifts from OFF to Step 1 to Step 2 to Step 3.
When OFF is displayed, a voice comes up saying “Energy Eye function is deactivated." The Set button blinks and
Mode, Menu/Selection and Cancel buttons light.
4. After selecting your preferred step, please press the SET button. A voice will come up saying "Energy Eye setting
has been completed" and your step will be stored.
5. If will be cancelled if you press the “Cancel” button or after 7 seconds without pressing any button. In this case a
voice will come up saying "Time exceeded, the mode will be canceled".
(When selecting Energy Eye function) (When deactivating Energy Eye function)
How to original setting
Loading ...
Loading ...
Loading ...