Loading ...
Loading ...
Loading ...
HOW TO CLEAN
13
www.cuckooworld.com
ENGLISH
How to clean the pressure weight nozzle.
2.
To close the lid turn the handle to
unlock, in shown in the picture on
the right.
1. Check to make sure the inner pot is
place correctly inside the main body.
3. If there is excess steam inside the
inner pot it might be difficult to lock
the handle. Twist the pressure
weight and allow the excess steam
to release. Then try to turn the
handle again.
Do not try to close the lid by force. It can cause problems.
When lid does not close perfectly
❷ Separate cover as
the arrow points.
❸ Use brush kit. You
can easily clean a
drain use the ditch
cap and tough pat to
clean.
❹ When using cleaning
pin, pull out cleaning
pin and make it meet
at right angles.
❺
Only use for the
vlave hole of the
pressure weight.
❶Separate cleaning pin Attached
on the bottem of the unit from
main body as shown in picture.
How to use cleaning pin and brush kit
❶Separate dew dish
❷
Separate the drain
ditch cap by pushing
it down.
❸ Clean the drain ditch
cap and dew dish with
a neutral detergent.
❹ Clean the drain
ditch cap with brush
kit.
❺ Securely put in the
dew dish after
cleaning.
How to clean dew dish
How to clean the soft steam cap
※
Do not touch the surface of the soft steam cap right after cooking. You can get burned.
❶Detach the soft
steam cap like the
picture.
❷
Press the hook in the back, and follow
the arrow to detach and clean. Make
sure you clean frequently with a
sponge or a neutral detergent.
❸ Assemble the went so that it fits into
the groove perfectly.
Packing
neutral detergent
U
nlo
ck
Lo
c
k
❶❷❸
•The valve hole of the pressure weight allows steam to release. Check regularly to ensure that it not blocked.
If the valve hole of the pressure weight is blocked, the hot steam and hot content within the cooker can
cause serious injury.
※Do not use the cleaning pin for any other use except to clean the valve hole of the pressure weight.
Cleaning Pin
If the valve of the pressure part is clogged, puncture it with the cleaning pin
How to
disassemble the
pressure weight
▶Under the Lock/Unlock handle is locked(located on “Lock”) turn the pressure weight counter-
clockwise while pulling it up, and pull it out.
▶Puncture the clogged valve hole with the cleaning pin and reassemble it by turning it clockwise.
▶When the pressure weight is properly assembled, it can freely be turned.
Pressure Weight
※
A
tta
c
h
e
d
o
n
th
e
b
o
tto
n
o
f th
e
u
n
it.
Alien
Substance
❹ After you attach the soft
steam cap to fit into the
groove, press “A” part
firmly to assemble the soft
steam cap into the product.
Soft steam cap
0216-383-915G rev.0-최종.qxp_383-915G rev.0 190*260.qxp 2016. 3. 14. 오전 10:22 페이지 13
Loading ...
Loading ...
Loading ...