Cuckoo CRP-FHVR1008L Electric Induction Heating Pressure Rice Cooker

User Manual - Page 8

For CRP-FHVR1008L. Series: CRP-FH10 Fuzzy Series

PDF File Manual, 32 pages, Read Online | Download pdf file

CRP-FHVR1008L photo
Loading ...
Loading ...
Loading ...
HOW TO CLEAN
12
-To prevent foul odor clean the lid assy after the rice cooker has cooled and the rice cooker is unplugged.
- Clean the body of rice cooker and the cover with a dry towel. Do not use benzene or thinner to clean the
r
ice cooker. The layer of starch, which is the residue from rice cooking, may appear on the detachable
cover or inside of rice cooker. This layer does not cause any health risk.
- Do not put materials like screws into holes of detachable cover. Check the back cover and front cover.
Detachable cover & Pressure packing
Detachable cover & Pressure packing
After cleaning detachable cover, put it back on the lid
Unless detachable cover is mounted, preset cooking cannot be done. (Alarm may sound while keeping warm.)
Make sure to clean the clean steam
went after/before use. Do not try to
pull out the clean steam went and
safety packing, clean it with care.
Make sure the clean steam went
and safety packing are installed
completely after/before use. If the
steam vent is detached, or not
attached completely, please
contact customer service.
Wipe the water on the outside and
bottom of the Inner Pot. A rough
sponge, a brush or an abrasive
can cause scratches on the
coating. Use a dishwashing liquid
and a soft cloth or a sponge.
Wipe the main unit with a wet cloth
that has been extracted out of al
water
Make sure to clean the steam
control went before and after
use.
Steam Vent Inner Pot
Pressure Packing
Inside of the Main body
Please fir a rubber packing into the cover plate completely after washing or replacing the rubber packing.
After fitting 6 projections to the holes,
please press the rubber packing
around the corner completely as
shown in the picture.
To put back the rubber packing,
please fit it to each of 6
projections and holes as shown
in the picture.
Rubber packing guide Oven cover point
To separate the rubber
packing, please pull it out
from the cover plate as shown
in the picture.
Please check that the rubber packing fits into the cover
plate completely. If not, steam may be released from the
crack between the packing and the plate.
Keeping the contact area of the Inner Pot
with the pressure packing always clean,
increases the product's durability.
Rubber
packing
contact
surface.
When mounting the cover,
grab separate cover handle,
attach it to hole, and after
adjusting holder on top of
packing stop tab, fix it by
turning it clockwise.
Wash the cover with cooking
purposeneutral detergent and
sponge frequently, and wipe
off moisture with handkerchief.
Please keep clean the edge
of rubber packing, then the
rice cooker last's longer.
Turn the holder counter
clock wise, and the cover
will be easily separated
from the cooker and can
be washed.
It is easier to attach the
cover holder when the
power part of the
detachable cover is
pressed.
I
nner pot
contact surface.
HOLDER OPEN
HOLDERCLOSED
As depicted in
the picture,
please align
holder with arrow
mark to open
and close.
1. Handle must be turned to “ ”(Lock) during Cooking.
When the lamp is turned on it means that it is ready to cook.
2. After cooking, turn the handle from “ ”(Lock) to “ ”(Unlock)
turn the handle to open.
If there is unreleased steam in the Inner pot
it might be hard to turn the handle. In this case twist the pressure
weight and let the excess steam out. Do not open by force.
Handle must be turned to “ ”(Unlock) when opening and closing.
If the lamp does not turn on, it would not
operate the “COOK/TURBO” button. Make
sure the handle is located in “ ”(Lock).
Caution
Do not clean the inner pot with any sharp cutlery inside (fork, spoon,
chopsticks, etc.).
- The coating of the inner pot may peel off.
0216-383-915G rev.0-최종.qxp_383-915G rev.0 190*260.qxp 2016. 3. 14. 오전 10:22 페이지 12
Loading ...
Loading ...
Loading ...