Loading ...
Loading ...
Loading ...
11
17. REINSTALL BAFFLE FILTERS
CAUTION
Remove protective plastic film covering filters before installing them.
It is recommended to install side filters first and finish with center one(s).
1. Insert one end of the filter into the upper channel
of the power pack.
2. Raise the other end toward the inside of power
pack and insert in the grease drip rail of the
power pack.
1
HD0299
2
18. LIGHT BULBS
This power pack requires shielded halogen lamps (120 V, 50 W, MR16 with GU10 base or PAR16 with GU10 base), included.
NOTE: Before using lamps, remove shipping tape on them (if present).
1. Install the lamps by placing the bulb leads into their grooves in the socket.
2. Gently push upwards and turn clockwise until secure.
To remove lamps, gently push upwards and turn counterclockwise to disengage bulb leads
from their grooves.
NOTE: To ease removal of the bulbs, use a rubber dishwashing glove or use suction cup
tool available from Best. Contact Best Customer Service at 1-800-558-1711 to order
suction cup tool, part no. 99526707.
WARNING
!
Do not touch lamps during or soon after operation. Burns may occur. In order to prevent the risk of personal injury,
only install shielded halogen lamps. Also, never install a cool beam, a dichroic lamp, a lamp not suitable for use in
recessed luminaires or identified for use in enclosed fixtures.
12
HO0090
Loading ...
Loading ...
Loading ...