Loading ...
Loading ...
Loading ...
3 Get started
Charge the battery
Note
Before you use your headphones for the rst
time, place the headphones in the charging
case and charge the battery for 2 hours for
optimum battery capacity and lifetime.
Use only the original USB charging cable to
avoid any damage.
Finish your call before charging the
headphones, as connecting the headphones
for charging will power the headphones o.
Connect the supplied Type C charging
cable to:
• Type C charging slot on the head-
phones and;
• The charger/USB port of a
computer.
Tip
Normally, a full charge takes 2 hours.
Pair the headphones
with your mobile phone
Make sure that the headphones are
fully charged and turned o.
The headphones remain in
pairing mode for 5 minutes.
Before you use the headphones with
your mobile phone for the rst time, pair
it with a mobile phone. A successful
pairing establishes a unique encrypted
link between the headphones and
mobile phone. The headphones store
the last 4 devices in the memory. If you
try to pair more than 4 devices, the
earliest paired device is replaced by the
new one.
LED turns blue during charging and
turns o when the headphones is
fully charged.
Press and hold for 4 seconds
until the blue LED ashes quickly.
Philips TAA6606
Make sure that the mobile phone is
turned on and its Bluetooth feature
is activated.
The following example shows you how
to pair the headphones with your mobile
phone.
Pair the headphones with the
mobile phone. For detailed infor-
mation, refer to the user manual of
your mobile phone.
Activate the Bluetooth feature of your
mobile phone, select Philips TAA6606
Enter the headphones password
“0000” (4 zeros) if prompted. For
those mobile phones featuring
Bluetooth 3.0 or higher, no need to
enter a password.
Loading ...
Loading ...
Loading ...