Loading ...
Loading ...
Loading ...
– The shift lever is in the P (Park) position.
– The driver’s seat belt is unfastened.
– The ignition switch is placed in the OFF
position.
– The parking brake is applied manually.
– If a malfunction occurs in the automatic
brake hold function.
The electronic parking brake is automati-
cally released as soon as the vehicle starts
and the accelerator pedal is depressed
with the driver’s seat belt fastened.
WARNING
• When the automatic brake hold func-
tion is activated, the electronic park-
ing brake will not be automatically
applied when the engine is stopped
without using the ignition switch (for
example, by engine stalling).
• Before leaving the vehicle, move the
shift lever to the P (Park) position and
check that the electronic parking
brake warning light is illuminated to
confirm that the electronic parking
brake is applied. The electronic park-
ing brake warning light will remain
on for a period of time after the driv-
er’s door is locked.
CAUTION
When parking in an area where the out-
side temperature is below 32°F (0°C),
the parking brake, if applied, may
freeze in place and may be difficult to
release.
For safe parking, it is recommended
that you place the shift lever in the P
(Park) position and securely block the
wheels.
NOTE:
• To keep the electronic parking brake
released after the engine is turned off,
place the ignition switch in the OFF po-
sition, depress the brake pedal and
push down the parking brake switch
before opening the driver’s door.
•
If a malfunction occurs in the electronic
parking brake system (for example, due
to battery discharge), it is recom-
mended that you visit a NISSAN dealer.
• Under the following conditions, the
parking brake will automatically be ap-
plied and the brake force of the auto-
matic brake hold will be released:
– The braking force is applied by the
automatic brake hold function for 3
minutes or longer.
– The shift lever is in the P (Park)
position.
– The driver’s seat belt is unfastened.
– The ignition switch is placed in the
OFF position.
– The parking brake is applied
manually.
– If a malfunction occurs in the auto-
matic brake hold function.
Manual operation
The electronic parking brake will not be au-
tomatically applied if the engine is stopped
without using the ignition switch (for ex-
ample, by engine stalling). In such a case,
you have to apply the parking brake
manually.
To apply: Pull the switch up
O
1
. The indica-
tor light
O
A
will illuminate.
To release: With the ignition switch in the
ON position, depress the brake pedal and
push the switch down
O
2
. The indicator
light
O
A
will turn off.
Starting and driving 5-23
Loading ...
Loading ...
Loading ...