Loading ...
Loading ...
Loading ...
8
Setting Up Your Wave
®
Radio
Connecting the power cord
1. Untie and straighten the bundled power cord completely to ensure the best FM recep-
tion. The FM antenna is built into the power cord.
2. Plug the small end of the power cord into the power jack on the back of your radio (Figure
3). The connector is shaped to fit in only one direction. Line up the flat edge of the plug
with the flat edge on the side of the jack.
3. Plug the other end of the power cord into an electric outlet. The display panel lights and
the time display begins flashing.
4. Press the Clock Set button once to stop the flashing. See “Setting the time” on page 15
to set the clock.
Figure 3
Connecting the power cord
Connecting the FM antenna
1. Plug the FM antenna into the FM 75
Ω
EXTERNAL connector (Figure 4).
2. For best FM tuning performance, straighten the antenna and extend the arms as far away
from the radio as possible. Avoid placing the antenna next to a metal surface. See the
recommended antenna orientation in Figure 4.
Figure 4
Connecting and setting up
the FM antenna
Connecting the coaxial cable
If you subscribe to cable radio or have a connection for an outdoor aerial, you can use the
coaxial cable to connect to the radio.
1. Plug the coaxial cable into the FM 75
Ω
EXTERNAL connector on the back of the Wave
radio (Figure 4).
2. Connect the other end of the coaxial cable to the outlet in your wall.
CAUTION:
Make sure the installation includes a signal splitter. It is important that only the FM
band, not the cable TV band, is transmitted to the radio. It is necessary to use a splitter that
filters the signal to prevent any re-emissions of the TV spectrum through the radio.
FM 75Ω EXTERNAL
antenna connector
FM 75Ω EXTERNAL
antenna connector
Loading ...
Loading ...
Loading ...