Loading ...
Loading ...
Loading ...
22 English
If you place the kele on the base plate, the LED display now shows the current
ACTUAL temperature of the water in the kele (display min. >= 0°C ). If the device
is not used for 5 minutes, the display switches o automacally. The display can be
reacvated by pressing any key, or by simply liing and placing the kele from the
base. A control panel is located at the top of the handle. Press the „+“ and „-“ but-
tons and select your desired temperature. Alternavely, you can directly select the
temperatures 40/60/80/100°C with the „SET“ buon and correct it with the „+“ and
„-“ buons. Press the „Start“ buon in order to start up the device (a short beep will
sound) and it is indicated by the dot above the temperature display on the display.
Once the water reaches the set temperature, you will hear a long beep signal. The
heang element switches o automacally and the boiling process is stopped. The
appliance can now be lied and the water can be used. If you want to stop the
boiling process early on, you can press the "start" buon at any me.
Before reaching the target temperature, the kele interrupts the heang process
in order to carry out an intermediate measurement. Please wait unl the boiling
process has been completed. An acousc signal sounds at the end if the signal
tones are acvated.
Note: If you press the „START“ buon directly when the display is switched on, the
device is started with the last set temperature!
5.1 Keep-warm funcon
The "KEEP WARM" funcon is intended to keep the boiled water warm for a long
period of me. Set your desired temperature with the “+” and “-” buons. Press
the “KEEP WARM” buon in order to start. The kele acvates the keep-warm
funcon for 30 minutes and maintains the set temperature. It is indicated by the
three dots above the temperature display on the display. Please note that the ket-
tle temperature heats up to temperatures above 90 °C, but that it can not keep
temperatures above 90°C while in keep-warm funcon.
5.2 Switching key signals on and o
You have the possibility to switch o the signal tones o the device or to reduce
them to the most necessary key tones. To do this, press the “Keep warm” and
“Set” buons together. A short beep appears and means that the beeps are
switched on. If a long beep appears when the “keep warm” and “set” buons are
pressed, the beeps of the device are switched o.
Press the “Keep warm” and “Set” buons together, to switch the key signals on
and o.
Loading ...
Loading ...
Loading ...