SKSDW2401S OWNER'S MANUAL

Loading ...

48 TROUBLESHOOTING

Error Messages

Problem Possible Cause & Solution

Water inlet problem.

• Check for a clogged, kinked or frozen water inlet hose.

• Check water supply.

Drainage Problem.

• Check for a clogged, kinked or frozen water drain hose.

Air gap or disposal is clogged.

• Clean air gap or disposal.

Filters are clogged.

• Clean filters.

Oversudsing caused by improper detergent, such as liquid dish soap.

• Do not use hand dishwashing liquids. Only use detergents which are designed for use in

automatic dishwashers.

•A

bE error can appear if dishes soiled with a lot of foamy food, such as whipped cream, are

loaded in the appliance. To clear the error, turn the appliance off and start a new cycle.

• To remove detergent residue in the tub, pour approximately 4 oz ~ 8 oz (100 ml ~ 200 ml)

of milk into a shallow bowl, place it in the upper rack and then run the appliance on the

Auto cycle.

Failure to level dishwasher.

• Make sure that the appliance is properly leveled.

Water leakage

• Turn off the water supply to the dishwasher and call a SIGNATURE KITCHEN SUITE

Customer Information Center at 1-855-790-6655 (U.S.A.) or 1-888-289-2802 (Canada).

• The dishwasher makes an alert sound for 10 seconds, and runs the drain pump

intermittently. If power is turned off to the machine, the machine powers back on

automatically until the AE error is resolved.

Excessive Water supplied.

• Please call a SIGNATURE KITCHEN SUITE Customer Information Center at 1-855-790-6655