Loading ...
Loading ...
Loading ...
49-80690-5 13
USING THE RANGE: Oven Controls
Oven Controls
1. Convection Cooking Modes: Convection
cooking modes use increased air circulation to improve
performance. The type of benefit depends on the
mode. Your oven has the following convection cooking
modes: Convection Bake and Convection Roast. See
the Cooking Modes section for more information.
2. Traditional Cooking Modes: Your oven has
WKHIROORZLQJWUDGLWLRQDOFRRNLQJPRGHV%DNH%URLO+L
Lo, and Warm. See the Cooking Modes section for
more information.
3. Clean: Your oven has two cleaning modes: Self
Clean and Steam Clean. See the Cleaning the Oven
section for important information about using these
modes.
4. Start: Must be pressed to start any cooking,
cleaning, or timed function.
5. Cancel/Off: Cancels ALL oven operations except
WKHFORFNWLPHU:DUPLQJ'UDZHUDQG:DUPLQJ=RQH
6. Cook Time: Counts down cooking time and turns
off the oven when the cooking time is complete. Press
the Cook Time pad, use the number pads to program
a cooking time in hours and minutes, then press Start.
This can only be used with Bake, Convection Bake,
and Convection Roast.
7. Clock: Sets the oven clock time. Press and hold the
9, 0 pads for three seconds or press the Set Clock
pad, then use the number pads to program the clock.
Press Start to save the time.
8. Timer On/Off: Works as a countdown timer.
Press the Timer On/Off pad and the number pads
to program the time in hours and minutes. Press the
Start pad. The timer countdown is complete. To turn
the timer off press the Timer On/Off pad.
9. Delay Time: 'HOD\VZKHQWKHRYHQZLOOWXUQRQ
8VHWKLVWRVHWDWLPHZKHQ\RXZDQWWKHRYHQWRVWDUW
Press the Delay Time pad and use the number pads
to program the time of day for the oven to turn on
then press Start. Press the desired cooking mode and
temperature then press Start. A Cook Time may also
be programmed if desired. Follow the directions under
Cook Time for setting this feature. This can only be
used with Bake, Convection Bake, Convection Roast,
and Self-Clean.
NOTE: :KHQXVLQJWKH'HOD\7LPHIHDWXUH foods that
VSRLOHDVLO\²VXFKDVPLONHJJVILVKVWXIILQJVSRXOWU\
DQGSRUN²VKRXOGQRWEHDOORZHGWRVLWIRUPRUHWKDQ
1 hour before or after cooking. Room temperature
promotes the growth of harmful bacteria. Be sure that
the oven light is off because heat from the bulb will
speed harmful bacteria growth.
10. Oven Light: Turns the oven light on or off.
11. Lock Controls: Locks out the control so that
pressing the pads does not activate the controls. Press
the Lock Controls pad, for three seconds to lock or
unlock the control. Cancel/Off is always active, even
when the control is locked.
12. Warming Drawer (on some models) or
Warming Zone: Will keep hot, cooked foods at
serving temperature. Press the Warming Drawer/
Warming Zone SDG8VHWKHQXPEHUSDGWRVHOHFWWKH
temperature setting. Press 1 for Low, 2 for Medium
or 3 for High, then press Start'UDZHULVEHORZWKH
Oven, Zone is on the Cooktop.
NOTE: 7KH&DQFHO2IISDGGRHVQRWWXUQRIIWKH
:DUPLQJ'UDZHURU:DUPLQJ=RQH7RWXUQRIISUHVV
the Warming Drawer or Warming Zone pad.
13. Probe (on some models): Monitors internal
food temperature and turns the oven off when the
food reaches the programmed temperature. Insert the
probe, program the cooking mode, and program the
probe temperature. See the Cooking Modes section
for more information. The probe can only be used with
Bake and Convection Roast.
14. Remote Enable (on some models): The
oven needs to be connected to your home network
before using the Remote Enable pad. The connectivity
symbol signifies the status of the oven connection to
your home network.
CONNECTING YOUR OVEN
Off - Oven is not connected. Open the app then press
and hold Remote Enable pad for 5 seconds to begin
the connecting process.
Slow flash - Oven is in discovery mode and looking
for a network.
Solid - Oven is connected to the network and can
be remotely controlled by a connected mobile device
when in operation, but cannot be started remotely.
REMOTE STARTING YOUR OVEN
To be able to start the oven remotely, press the
Remote Enable pad and the light above the Remote
Enable pad will turn on. Oven can now be remotely
started with a connected device. Opening oven door
or turning off oven will turn off the light above the
Remote Enable pad. The light above the Remote
Enable pad must be lit to start the oven remotely. The
light above the Remote Enable pad is not required to
change the oven settings or to turn oven off.
After using the oven, remember to verify that the light
above the Remote Enable pad is on if you wish to
start an oven remotely in the future.
Loading ...
Loading ...
Loading ...