Loading ...
Loading ...
Loading ...
EN
10
Operation
Preparing for Use
Before rst use, please charge the appliance for 4±0.5 hours (refer to “Charging Instructions” for details).
* Based on results from Tineco lab tests. Lab temperature 39.2°F (4°C) ~ 104°F (40°C).
AUTO MAX
Press the button and the appliance will start in AUTO
mode by default. Press it again to turn off the appliance.
Switch between AUTO and MAX mode by pressing the
AUTO MAX
button.
<142°
Do not recline the appliance more than 142° to protect
against water leakage.
Place the appliance on the charging base vertically after
use for recharge and storage.
Note:
• Please add cleaning solution before use. If you decide to only use water, power on while the
appliance is in an upright position, long-press
AUTO MAX
for 3 seconds. Selecting the appropriate
mode depending on the CWT contents is vital for maximum dirt detection effectiveness.
• Do not vacuum foamed liquid.
• To vacuum water left on the surface, the appliance will switch off in 3 seconds after power off.
Loading ...
Loading ...
Loading ...