Hoover K5XD2816 BNMHN User Manual

Loading ...

SUPER FREEZING Button: Press Super Freezing button to rapidly freeze big quantities of food keeping

intact nutritional food properties. If you want to exit the Super Freezing function, you need to press the

Super Freezing button again and the freezer temperature turns back to normal operation.

WI-FI Button: This appliance is equipped with OneFi+ technology that allows you to control it

remotely via App. Press OneFi+ button to activate Wi-Fi function.

Machine Enrollment (on App): Download the Hoover Wizard App on your device. The Hoover

Wizard App is available for devices running both Android and iOS, both for tablets and for

smartphones. Get all the details of the One Fi+ functions by browsing the App in DEMO mode.

Open the App, create the user profile and enroll the appliance following the instructions on the

device display or the "Quick Guide" attached on the machine. This operation is necessary just for

the first installation. To finalize the enrollment following the instruction on the smartphone’s screen.

Refrigerator usage from remote by App: When the enrollment is completed, there will be Wi-Fi LED

switched on. From now on it will be possible to manage the product by using the buttons on the

display or using the App: both of them will be aligned according to the last command given.

LOCK Button: Press Lock button to block display user interface (Lock icon enlights, “LO” appears on display

and, after 2 seconds, the refrigerator and freezer temperature shows recovery). If you want to exit Lock

function, press the "Lock" button again for 3 seconds, and the refrigerator will exit the Lock function.

INTERNAL USER INTERFACE (if present)

SET Button: Press SET button for setting the temperature until you reach the level you want where

level 1 is the warmest and level 4 is the coldest. Under normal operating conditions, we recommend

using an intermediate setting (level 2).

Once the setting takes effect, it immediately enters the corresponding stall for operation control,

and the stall indicator lights up 3s3min and then goes out. Factory default temperature is set to 2.

Long press "SET" key to exceed 3s and enter the hardware self-check program. The hardware self-

check operation is effective within 10min, and the long button operation after 10min is invalid.