Loading ...
Loading ...
Loading ...
switching back on to allow the coolant fluid to settle.
4. Before connecting the Refrigerator to the mains supply position. The thermostat control
dias is located inside the Fridge compartment.
5. Turn the thermostat knob to the “3” position and turn on the electricity. The compressor
and the light inside the refrigerator will begin to work.
6. Before storing foods in your refrigerator, turn the refrigerator on and wait for 24 hours,
to make sure it is working properly and to allow the Fridge/Freezer to fail to the correct
temperature.
7. Open the door 30 minutes later, if the temperature in the refrigerator decreased
obviously, it shows that the refrigerator system works well. When the refrigerator
operates for a period of time, the temperature controller will automatically set the
temperature within limits it opens.
COMBI OPERATION
Appliance connected to power at the first time: When the appliance is connected to power at the
first time, the display will be lit for 2 seconds before going normal and the appliance runs with
intelligence function.
Display Control: When the refrigerator door is closed and there is no button operation in 3 minutes,
the display light goes off.
When the display light is off, open the refrigerator door or click any button to light it up.
VERTICAL DISPLAY (if present)
TEMPERATURE SETTING: Click the “Fridge” or “Freezer” button and when it flickers in the symbol,
temperatures can be set. Each time when the button is clicked, the temperature changes
accordingly. Temperatures cannot be set under functions of fast cooling, fast freezing, Smart ECO
and vacation. Under temperature setting, if there is no button operation in 5 seconds, the button
stops flickering and the set temperature comes into effect.
SMART ECO: Activate the Smart Eco button to set the temperatures of the fridge in max. energy
efficiency conditions (+4°C for fridge temperature, -18°C for freezer temperature).
To enter Smart Eco: Click “option” until it flickers and then click “OK” to enter this function.
To deactivate Smart Eco: Click “option” until it goes to Smart ECO, click “OK” to quit this function
and the light goes off.
Loading ...
Loading ...
Loading ...