Test your deadbolt.
Make sure your current deadbolt throws
smoothly without pushing or pulling the door.
01
05
Disassemble your lock.
Unscrew your existing lock housing, deadbolt,
and strike plate.
02
Install your Level Touch and
strike plate.
A. Insert the included bolt into your door with
the word TOP facing up. Look through the
borehole— if you can see the end of the bolt
sticking out, you’re good to go to step C.
B. If you can’t, simply take it out of your door
and use a screwdriver to extend the bolt.
Ensure the bolt snaps into place and put it
back in your door, with the word TOP facing up.
C. Fasten the bolt with the provided bolt plate
screws.
D. Slide on the motor and make absolutely
sure to tighten the connecting screw.
E. Fasten the strike plate to your door jamb
with the provided strike plate screws.
03
Reassemble your lock using
the Level Touch housing.
Make sure the bolt is retracted (unlocked).
A. Using the included housing, thread the
tailpiece on the keyhole side through the center
hole in the motor and screw the two sides
together with the provided security bolts.
B. Snap the paddle in vertically to hide the
security bolts.*
*To disassemble in the future, use a paperclip or pen
to press the small hole on the bottom of the paddle,
pulling away from the door to release it.
04
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. For more
information on FCC compliance, please go to www.level.co/FCC
The Level Touch Edition is BHMA Grade AAA certified. You assume all risk
and responsibility in relation to the installation and performance of the lock
and any third party components and services used in relation to the lock.
Please follow these suggestions and safeguards to decrease the chances
of damage to your Level Touch and to lessen the risk of harm or injury:
- Use the lock for its intended purposes only.
- Keep body parts away from the lock during operation to avoid injury.
- Do not crush, perforate, drop, throw, or try to deform the lock or battery.
- Do not short external contacts or circuits, expose your lock or battery
to water, liquids, or open flames or lit substances, or dispose of them in fire,
solvents, or water.
- Do not use the lock or battery if they aren’t working properly or have been
damaged or cracked.
- Dispose of the lock and battery in accordance with local requirements.
- Do not charge CR2 lithium batteries.
Battery life varies with usage.
Caution: This product comes with small parts and parts with
sharp edges that may cause injury or create a choking hazard.
To avoid injury or damage, keep away from children.
Revision 1.0
Activate your Level Touch.
Unscrew the cap on the end of the bolt and
insert the battery with the flat (negative) end
towards the cap. If you adjusted the bolt to
the long position, use the included long cap
instead of the standard cap. When you screw
it back in, you’ll hear a welcome chirp.
Download the Level Home app for iOS® or
Android™, create an account, and connect to
your Level Touch.
Scan the QR code on the back to enable
HomeKit™.
Support 7 days a week. Visit www.level.co/support for additional help.
2-year limited warranty. Visit www.level.co/warranty for more information.
Visit www.level.co/install for more information and tips on installing
your Level Touch.
What you need:
Phillips Screwdriver
Compatible iOS® or Android
Device™
Do not use power tools.
Power tools can easily strip
screws.
Key housing
Bolt
Paddle housing
Motor
(under housing)
Accessory box
Strike plate
2 Keys
2 Keycards
CR2 battery
Long cap
2 Strike plate screws
2 Bolt plate screws
2 Security bolts
Touch Edition
