Loading ...
Loading ...
Loading ...
14 | English
1 609 92A 1M8 | (11.1.17) Bosch Power Tools
Use the saw station only for cutting the materials listed
under Intended Use. Marble or granite as well as tiles with
a rough surface structure and natural stone tiles cannot be
cut.
Observe valid national and international standards.
Product Description and
Specifications
Intended Use
PLS 300: Together with the power tool, the sawing station is
intended for sawing straight lengthway and crossway cuts in
boards and profiles of hardwood and softwood, as well as al-
uminium and plastic.
Horizontal mitre angles from a maximum of –45° to +45° as
well as bevel angles from a maximum of 0° to 45° can be set.
The sawing station is intended for operation exclusively with
jigsaws from the Bosch PST DIY program.
Only use the saw blades recommended by Bosch (see
page 127). When using saw blades that are too thin, dan-
ger is given that the cut runs out of centre.
PLS 300 Set, PTC 1: Together with the tile cutter, the sawing
station is intended for cutting ceramic and nonvitreous tiles to
a maximum thickness of 10 mm.
Horizontal mitre angles from a maximum of –45 ° to +45 ° can
be set.
Product Features
The numbering of the product features refers to the illustra-
tion of the sawing station on the graphics pages.
PLS 300
1 Base unit
2 Scale for mitre angle
3 Locking knob for height adjustment
4 Guide rail with sawing slot
5 Side stops of the guide rail
6 Support extension
7 Additional support
8 Bridge
9 End stop for bevel cuts
10 Locking lever of the guide rail
11 Alignment mark
12 Locking knob for various mitre angles
13 Mitre angle indicator
PTC 1*
14 Tile cutter
15 Stop with scale
16 Break-off cones
* only in combination with PLS 300 Set
Technical Data
Only use the saw blades recommended by Bosch (see
page 127). When using saw blades that are too thin, dan-
ger is given that the cut runs out of centre.
Sawing station PLS 300 PLS300 Set
(PLS 300 + PTC 1)
Article number
3 603 M04 0.. 3 603 M04 1..
Sawing
– Max. cutting length for crossway cuts (90°)
– Max. cutting height
– Mitre/Bevel Angle
Horizontal
Vertical
mm
mm
°
°
315
25
± 45
± 45
315
25
± 45
± 45
Cutting tiles
– Max. cutting length for crossway cuts (90°)
– Max. cutting height
– Mitre/Bevel Angle
Horizontal
mm
mm
°
–
–
–
340
10
± 45
Weight according to EPTA-Procedure 01:2014
kg 3.4 3.4 + 0.2
Dimension of suitable saw blades
Max. overall length
mm 100
Max. toothed length
mm 76
OBJ_BUCH-1219-003.book Page 14 Wednesday, January 11, 2017 1:29 PM
Loading ...
Loading ...
Loading ...